Philips HX6932, HX6942 Attaching the brush head, Charging your Sonicare, Deluxe recharge gauge

English

1 Pull the colour code ring from the bottom of the brush head.

2Slip one edge of the new ring over the bottom of the brush head.

Then press down on the other side to snap the ring in place.

Attaching the brush head

1Align the brush head so the bristles face the front of the handle.

2 Firmly press the brush head down on the metal shaft until it stops.

Note:There is a small gap between the colour code ring and the handle.

clean	ve
sensiti

Charging your Sonicare

1Plug the charger or sanitiser into a wall socket.

2Place the handle on the charger or sanitiser.

,The flashing light on the battery gauge indicates that the toothbrush is charging.

Deluxe recharge gauge:

Indicates the amount of charge left in the battery

-3 green LEDs: 75-100%

-2 green LEDs: 50-74%

-1 green LED: 25-49%

-1 flashing yellow LED: less than 25%

Note: If the battery charge of your Sonicare is low, you hear 3 beeps and 1

LED on the recharge gauge flashes yellow for 30 seconds.

Note:To keep the battery fully charged, we recommend that you keep your Sonicare on the charger or sanitiser when not in use. It takes at least 24 hours to charge the battery fully.