R-4104.A
REASSEMBL Y PROCEDURE | 1. Coaxial Coarse and Fine Focus Knob Unit |
|
|
e~~~
'123f109f 105 i 106)
.
1•
;I \
Fig. 37
7)Attach gears e@ and @ to pinion case @ , and coarse focus knob bearing @
(this should be cleaned, beforehand) to e@ by means of screws @x3. e@ and e@ are to be oiled as shown in Fig. 36, after cleaned and dried.)
8)lnsert the subassembly consisting of e@]) (coarse focus case) and @ (coarse focus shaft) and @ and @ (gears), as shown in Fig. 37 (apply oil to @ as shown in
Fig. 10).
9)Thereafter, following 4)- l ), reverse the disassembly procedure. (After cleaned and dried, fine focus shaft @ , gears @ and @, @, e@ and @ and gears @ and @ should be oiled as shown in Fig. 24.
Cover plate @ is to be cemented by No. 616. Apply G7920 to plate spring e@ and washer @.
- 33 -