Nikon 50i and E100 manual 4108.A, Repair ANO· Adjustment

R-4108.A

REPAIR ANO· ADJUSTMENT 5. Wobbling in Y (to and fro) Movement

(1 )-b) If any dent is found on the guide rail @ ,the roUers@ or if the retainer(2) is deformed replace them wi th spares.

Procadure

i)Detach the slide holder assembly from the stage releasing the screws @ x 2.

ii)Remove the rack@ releasing the screws @x2.

iü) Remove the handle assembly releasing the screws @ x 2 of the pinion cover(V.

iv)Releasing the screws @)x4 separa te the X guide block (D from the Y guide blocks @ , @ . Then, the X movement block (D, the roUers{0 and the retainers @ , @ will be made free.

v)Releasing the screws@xJ, remove either @ or 3B from(i) leaving another one fixed on G) to make the basis for the reassembling. Then, the base plate (D, the rollers@ and the retainers(Z) become free.

vi)If any dent is found on the Y guide rails @ ,the rollers@ or if the retainer

(2)is found defonned replace them with spares.

vii)Follow the reassembling procedure.

viii)Check wobbling in the Y movement.

- 16 -