Nikon 50i and E100 manual 4106.A, Care FOR. Starting Repair Care for Starting Repair

R-4106.A

CARE FOR. STARTING REPAIR

CARE FOR STARTING REPAIR

•Keep as far as possible the lens surfaces free from dust, t1nger mark, etc.

•For dusting the tenses, use a soft hair brush or gauze. Only for removmg finger marks, grease or the like, use a soft cloth, gauze ar specified lens tissue soaked w11h a tntle uf Jbsulute Jkohol 1111érl1Jt!.,.

ethanol).

• For cleaning the parts painted ar of plastic, avoid the use of organic solvents such as alcohol, ether, thmner.

C11 For the parts to which a specific oil has been applied, for maintaining the efficiency and accuracy, use

the oil specified in the lubricant table.

• Handle at ali times the parts carefully for fear of causi.ng at any damage by shock.

C11 Use an appropriate amount of bonding agent to avoid overflow.

• For the times required for setting and separation of various bonding Jgents, refor to the followmg t;ihle.

1		Time for setting	Caution	'			Separation
				1'
				1				1
		24 hours at normal	Proceed to assembly, after	1		Difficult. Strike it wi1h hammer		1
	No. 2001			1
		temperature	setting.			lightly ar scrape it off.
				1
	No. 921	10-20 sec. at		!		Difficult. Strike it with hammer
		normal temperature		'		lightly or scrape it off.
1
		24 hours at normal	Use d for locking screw.			Apply a drop of alcohol for
		temperature	Apply it to threaded part,	1		separation.
	No.350
			and screw in, thereafter
			leave it.
	No. 2002	Does not set	After applying, leave it for			Possible. Apply a drop ot
		perfectly.	l O - l 5 mi.n. and then st1ck.			toluene.
i
1
1		24 hours at normal	After setting, proceed to	1		Difficult. Strike tt lightly with
i No.616		temperature	assembly.		i	hammer or scrape it off.		'
i
				'
'		24-48 hours at	Even after setting, it shows		i	Difficult.
				!
		nromal tcmperature.	clasticity.	1		S..:rape it off.
	No. 503
		Check setting by
		touching with finger.		1				1
								1
				1				_j

- 1 -