Nikon 50i and E100 manual Th1s edges

R-4106.A

REASSEMBL Y PROCEDURE 3. UW·tube

6)Insert lenses +® and @ into (®, and tlx thern with retammg rmg 1'IV(to be positioned

as ~- th.i cker). t:;:ttz:Pl!::J _

()own !

7)Fix prisrns @ and @ onto dovetail prisrn holder @ with plastic screw (IJ), transitorily in such a position that the bottorn edges of prisrns coincide with the ends of the walls on both sides, as shown in Fig. 27.

' th1s edges.

Fig. 27

8)Insert lenses @ and @ (to be positioned as 8ffiBTJ_ thicker) into tens charnber (ÍÜ).

'- '

Oown

apptying a trifle of No. 2001 at three points on the stage.

9)Fix @ to main body@ with screws e@ x 2 at the center of the hote in @.

3-2. Photo-tube (Refer to Fig. 7)

1)Insert lenses @ and @ into tens charnber G), and fix thern with retaining ring G).

2)Screw in G) into intemal tube Q).

3)Screw in Q) into rnain body G).

4)Screw in sleeve G) into(D, referring to the mark-0ff tine made at the time of disassembty. After adjustment, stick it onto the fitting part ofG) and G°). using No. 350.

5)After adjusting the optical axis, attach (D to Q) with screws @ x J.

-31-