Toshiba CTX manual Paging, Call Forward Override DSS Override, Night Transfer Button

DADM/DSS Console

DSS Console

Paging

You can make an announcement page to a group of telephone speakers selected in system programming with $OO￿&DOO￿3DJH on the DSS console. 6' (if programmed) on either the DSS console or the DADM can be used for page announcements. See “All Call Page” on page 52.

Call Forward Override (DSS Override)

Either the DSS buttons on your DSS console or the associated telephone can be set in system programming to ring stations that are in the Call Forward mode, instead of being forwarded. Usually the console’s telephone is the unit activated to perform this function. Among other applications, this feature can be used to notify a person who forgets to deactivate the Call Forward feature after returning to the office.

➤To override call forward with the console’s associated telephone

1.Press &QI￿7UQ or extension button.

2.Dial the station number set for call forward.

Make the call as you would from any other station. This procedure assumes your station has a typical program setting.

➤To override call forward with your DSS Console

➤ Press the station DSS button set for Call Forward.

Night Transfer Button

This button enables a pre-programmed station to place the system into Day, Day2 or Night Mode. See your System Administrator for information on the settings for Day, Day2 or Night Mode. Usually, these modes will transfer calls to a designated location or voice mailbox, depending on programming.

1.Press 1LJKW￿7UDQVIHU.

2.Press the desired Mode number:

•Press ￿ for Day Mode (LED remains off).

•Press ￿ for Day2 Mode (LED flashes red).

•Press ￿ for Night Mode (LED is solid red).

86 Strata CTX DKT/IPT Telephone 11/03