Toshiba CTX manual Conference Split/Join/Drop, To Split from a conference

The Basics

Conference Calls

Conference Split/Join/Drop

If you initiate a conference with two or more parties, you and another member of the conference can leave (Split) the conference for a private conversation. During this time, other conference members remain connected.

You can then Join both of you back into the conference, or you can Drop (disconnect) the member you are connected to. This feature is performed with Soft Keys if you have a 3000-series LCD phone or on a 2000-series LCD phone with a Split button created on one of your flexible buttons.

Important! DKT2000-series telephones don’t display the SPLT soft key, so you must create a 6SOLW key using the feature key assignment method. (See“Setting/Changing a Flexible Button’s Function” on page 73.)

The Split feature requires Strata CTX R2.2. This feature also works for remote stations which are connected through Strata Net QSIG.

Important! You must be a conference master to perform the Split and Drop features. The conference master is the person that initiates the conference call. If that person drops from the conference, the first person added to the conference becomes the conference master.

➤To Split from a conference

1.While in a conference call on a DKT3000 phone, press the SPLT (Split) soft key or Split button. The telephone LCD shows first conference party member.

200+202

EXIT CONF SPLT

Mode Page Scroll Feature

7032

2.Press the number of the party that you want to Split out of the conference.

Example (shown right), if you want to Split with extension 200, press the NEXT soft key

until you see 200. Then press the number shown to the left of it (￿) on the dial pad.

1:200

RTRN NEXT

Mode Page Scroll Feature

7033

16 Strata CTX DKT/IPT Telephone 11/03