Toshiba manual Distinctive Ringing, To set distinctive ringing CTX software R1.2 or lower

Advanced Operation

Distinctive Ringing

Distinctive Ringing

➤To set distinctive ringing (CTX software R1.2 or lower)

1.Press ￿￿￿￿￿ to enter User Programming Mode.

2.Press a /LQH button. The Line LED is steady green.

3.Enter the ringing pitch number:

￿￿ = Low, ￿￿ = Middle, ￿￿ = High, ￿￿ = Combination

4.Lift the handset￿to return to idle.

➤To set distinctive ringing (CTX software R1.3 or higher)

1.Press ￿￿￿￿￿ to enter User Programming Mode.

2.Press a /LQH or extension button. The LED is steady green.

3.You can press +ROG to switch between internal and external pitch. (Internal = station calls within your system; external = outside line calls.)

4.Enter the two-digit pitch number (see table):

5.Press the same button that you pressed in Step 2 (/LQH or extension). Two beeps is a confirmation tone and “DATA PROGRAMMED” displays on your LCD.

Table 4		Internal and External Call Ringing Tones
	Tone No.		Frequency and Cadence
	01		500 Hz 1 sec. On, 3 sec. Off, repeat
	02		1300 Hz 1 sec. On, 1 sec. Off, repeat
	11		500/640 Hz 1 sec. On, 3 sec. Off, repeat
	12		500/640 Hz 1 sec. On, 1 sec. Off, repeat
	13		860/1180 Hz 1 sec. On, 3 sec. Off, repeat
	14		860/1180 Hz 1 sec. On, 1 sec. Off, repeat
	15		1300/1780 Hz 1 sec. On, 3 sec. Off, repeat
	16		1300/1780 Hz 1 sec. On, 1 sec. Off, repeat
	17		860/1180 Hz 0.5 sec. On, 1300/1780 Hz 3 sec. Off, repeat
	18		860/1180 Hz 0.5 sec. On, 1300/1780 Hz 1 sec. Off, repeat

42 Strata CTX DKT/IPT Telephone 11/03