Toshiba CTX manual Dadm, Buttons and LEDs

Page 96

DADM/DSS Console

DADM

DADM

Digital add-on Modules (DADM) can be connected to 3000-, IPT, and 2000-series telephones to provide additional buttons. Certain models are not interchangeable.

The DADM3120 works with the DKT3000-series telephones and the IPT1020-SD. The DADM3020 works with 3000-series telephones only and the 2000-series telephone requires a 2000-series DADM.

The DADM3020 model, is shown below, right. The DADM2020 (not shown) looks similar and has the same functions.

Buttons and LEDs

The DADM3120 and DADM3020 essentially look and operate the same way, each providing 20 feature buttons to their respective telephones. These flexible feature buttons can be assigned as CO line, Directory Number, DSS, One Touch Speed Dial or any other flexible feature.

Up to two DADMs can be attached to a telephone to provide 40 buttons to supplement the telephone’s 10 or 20 buttons.

Each DSS button and /LQH button has an LED that provides a status of the outside line or station assigned to it. The DSS button acts like a speed dial button to a specific extension.

•A station or line shows steady red when in use by others; green when in use by the DADM.

•A DSS LED will flash red while making a call and turn intermittently green once connected.

•An outside Line LED is green when the outside line is in use by the DADM console user. It is red if it is in use by another telephone user.

Note Button numbers in the figure to the right are examples only.

209 219

208 218

207 217

206 216

205 215

204 214

203 213

202 212

201211

200210

First DADM

229 239

228 238

227 237

226 236

225 235

224 234

223 233

222 232

221231

220230

Second DADM

2038

82	Strata CTX DKT/IPT Telephone 11/03

Image 96

Contents DKT/IPT Telephone User Guide Publication Information Toshiba America Information SYSTEMS, INC. Tais Toshiba America Information Systems, Inc Contents Advanced Operation Iii DKT3014 LCD Features Appendix a Centrex Application Appendix C IPT1020-SD Settings Introduction OrganizationHow to Use This Guide ConventionsRelated Documents/Media See FigureIntroduction Grand Tour DKT3000-series TelephonesGrand Tour Fixed Buttons Flexible ButtonsLiquid Crystal Display IPT1020-SD Telephones DKT2000-series TelephonesDKT2020-SD Telephone Line Buttons Basics Important Read FirstWhat’s My Line? Which Outgoing/Incoming Call Features Do I Have? Making a Call Hot DialingSpkr Button HandsetSwitching Between Handset and Speakerphone Answering a CallSpeaker Handsfree AnswerbackMessage Waiting Responding to a Lit Msg LEDMicrophone Turning On/Off MW LED on Another ExtensionCall Transfer To transfer a call directly to Voice Mail VMTo perform Call Transfer Immediate Conference Calls To conference callsTo transfer conference control To hold a conference callConnecting Two Outside Lines Adding Voice Mail to a ConferenceConference Split/Join/Drop To Split from a conferenceTo Drop the Split party from a conference Hold Exclusive HoldAutomatic Hold Consultation HoldVolume Control LCD Contrast AdjustmentsTo adjust the handset volume To adjust handset Beep ToneLCD Contrast Adjustments Using Your LCD Advanced OperationSoft Keys LineSoft Key Example Advisory Messages To set an advisory messageTo clear the registered message To dial using Forced Account Codes Account Code CallsVerified/Non-Verified Account Codes Forced Account CodesTo dial using the Account Code button To enter an Account Code using access codesVoluntary Account Codes Verified/Non-Verified To cancel Automatic Busy Redial Automatic Busy RedialTo activate Automatic Busy Redial To cancel ACB Automatic CallbackTo set Automatic Callback To enable background music on your telephone speaker To cancel background music on your telephone speakerBackground Music To change the BGM source 1~15 assigned to the BGM buttonCall Forward SystemStation Call Forward Settings Station Call Forward CategoriesStation Call Forward Procedures To use the Call Forward button sequenceCall Forward Procedure Feature Button Sequence Call Forward ExamplesCall Forward Procedure Feature Button Sequence Advanced Operation An ext Call History Call Park OrbitsTo view Call History Call Pickup Group PickupTo park a call To retrieve a parked callRinging, Page or Held Call Pickup To perform Call PickupCall Waiting To answer a waiting call by placing the current call on holdDirect Inward System Access Disa Direct Station Selection Buttons HotlineTo connect directly to another station’s extension Distinctive Ringing To set distinctive ringing CTX software R1.2 or lowerTo set distinctive ringing CTX software R1.3 or higher Do Not Disturb To activate DND on your Primary extensionTo activate DND on a non-Primary extension To deactivate DNDSetting DND for Another Extension Door LocksDoor Phones To answer a door phone callEcho Cancellation Emergency CallEmergency Monitoring Station To call/monitor a door phoneEmergency Ringdown Language CodesMicrophone Cut-Off To change the Language DisplayOff-hook Call Announce To make an OCA callTo answer a Handset OCA call To answer a Speaker OCA callOverride Calls Busy OverrideDo Not Disturb Override To use Busy OverrideExecutive Override Destination Restriction/Traveling Class OverrideTo perform Executive Override To use Destination Restriction or Traveling Class OverrideClass of Service Override To perform Class of Service OverridePaging Privacy OverrideAnswering a All CallEmergency To make an All CallTo set/cancel Privacy PrivacyRedial To use Privacy ReleaseMaking a Call Using Speed Dial Speed DialAccessing System SD and Personal SD Directories To access the SD directoriesAdvanced Speed Dial Operation DKT3014-SDL Name StorageTone/Pulse Dialing To change Tone DialingVoice Mail Direct Transfer Voice Mail Soft KeysAccept Soft Keys for CTX Digital Telephones Next Name Security Code Call Recording To record a callOther Voice Mail Features Pause/Resume RecordingDKT3014 LCD Features Directory and Speed Dial Listings Direct Station SelectionSystem Speed Dial and Personal Speed Dial Internal Directory and External DirectoryStoring Personal Speed Dial Names To assign Station Speed Dial namesPress 6SGLDO. The Speed Dial name is now programmed DKT3014 LCD Features Programming Feature Buttons User ProgrammingUser Programming Mode Flexible Button CodesSetting/Changing a Flexible Button’s Function Feature CodeOne Touch Buttons Changing a One Touch ButtonSetting/Changing a Personal Speed Dial Code To Use a One Touch ButtonFeature Codes Feature Access Codes Feature Access Code Sequences1 Messaging Advisory 6SGLDO4+QQQ LED Indicator Details LEDDADM/DSS Console Dadm Buttons and LEDsDSS Console DSS ButtonsCalling a Station Transferring to an Idle StationTo transfer a call to an idle station Call Transfer with Camp-on Call Answering Outside LineSpeed Dial To transfer call to a busy stationPaging Call Forward Override DSS OverrideNight Transfer Button To override call forward with your DSS ConsoleCentrex Feature Buttons Centrex ApplicationFlexible Directory Numbering Ringing RepeatDelayed Ringing Button Labels DefinitionsLQH 3656 Button Labels IPT1020-SD Settings FB Buttons FB buttons for 10-button phonesFB buttons for 14-button phones Initializing the IPT1020-SD IPT-to-IP Network Connection InstructionsManual setting, then press +ROG. Press % IP Telephone Start Up Sequence Action LCD Indication RemarksIPT1020-SD Function Settings FB3Setting the IPT1020-SD Headset Transmit Volume Viewing IPT1020-SD Terminal InformationIndex 101102 103 104