Toshiba CTX manual DSS Console, DSS Buttons

DADM/DSS Console

DSS Console

DSS Console

The Direct Station Selection (DSS) console
operates alongside of a digital telephone to
provide 60 additional buttons. The 3000-
series telephone requires a 3000-series DSS;
the 2000-series telephone requires a 2000-	209	219	229	239	249	NT
series DSS. A DDSS3060 example is shown
right. The DDSS2060 (not shown) looks	208	218	228	238	248	AC
similar and has the same button/LED	207	217	227	237	247	257
functions.	206	216	226	236	246	256
Note The IPT1020-SD does not support a	205	215	225	235	245	255
DSS console.	204	214	224	234	244	254
The 60 flexible feature buttons can be	203	213	223	233	243	253
assigned as CO line, extension, DSS, One	202	212	221	232	242	252
Touch Speed Dial or any other flexible	201	211	221	231	241	251
feature.	200	210	220	230	240	250

The DDSS3060 console uses dual red and green LEDs to show call and feature status.

2039

Note Button numbers in the above figure are examples only.

DSS Buttons

DSS buttons can appear on both the DADM and DSS Console. Each DSS button is associated with a particular station in your telephone system. DSS buttons can transfer an outside call to the associated station or make a direct call to the associated station.

The DSS LED lights steady red when the station associated with the DSS button is ringing, busy on a call, or when the associated station is idle, but all appearances of the station’s extensions are busy or in-use by other stations. When the associated DSS button is in the Do Not Disturb mode, the LED blinks red at a slow rate.

DSS buttons cannot call station Phantom extension numbers, Distributed Hunt Group Directory Numbers, or ACD Groups. DSS buttons may be configured as One Touch Buttons that may be programmed to call these destinations.

The LED colors described in this section apply to the DADM3020 and DDSS3060. Described Flash conditions apply to all DSS console models and the DADM.

Strata CTX DKT/IPT Telephone 11/03 83