Toshiba CTX manual Paging, Class of Service Override, Privacy Override, To make a Group

Advanced Operation

Paging

Class of Service Override

By dialing a Class of Service (COS) Override code, a user can change a station’s set of privileges to one associated with the override code. When the call is terminated and another is attempted from the same station, the original COS is applied. This allows selected users to override restrictions that are placed on any telephone in the system.

➤To perform Class of Service Override

1.Access an outside line. You hear dial tone and the LED flashes at the in-use rate.

2.Press &QI￿7UQ + ￿￿￿￿. Dial tone stops. Your LCD prompts you to enter a code.

3.Enter the COS Override Code (four digits). You hear dial tone. For security reasons, the override codes are only available on a selected basis. See your CTX System Administrator.

4.Dial a telephone number.

Privacy Override

This feature enables you to enter an established call on a line you share with another telephone. Up to two station users can enter an existing CO line-to-station call (i.e., up to three stations can be connected to a CO line). You can also use this feature if the station that is already connected to the CO line is in the Privacy Release mode.

Station users with 3ULYDF\￿5HOHDVH can allow stations with the shared button appearance to enter their conversations, even if the station entering the conversation is not programmed for Privacy Override. (see “Privacy” on page 53.)

Paging

Station users can make page announcements to telephones and external speakers. Check with your CTX System Administrator to find out the zone numbers for various paging groups.

➤To make a Page Announcement to telephones or external speakers

1.Lift the handset, press extension and enter a paging access code.

2.Make your announcement, then hang up.

➤To make a Group Page

Strata CTX DKT/IPT Telephone 11/03 51