CHARGING THE BATTERY PACK
▼ Initial Battery Charging
Before plugging the phone line into your new phone for the first time, fully charge the rechargeable battery pack for
1) Place the handset on the base.
2) Make sure that CHARGE/IN USE LED lights. If the LED doesn’t light, check to see that the AC adapter is plugged in and that the handset makes good contact with the base charging contacts.
CHARGE / IN USE LED
▼Low Battery Alert
When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power. If the phone is not in use, “Low Battery” appears on the LCD and none of the keys will operate.
If the phone is in use, “Low Battery” flashes and the handset beeps. Complete your conversation as quickly as possible and return the handset to the base unit for charging.
NOTES: •Information stored in the phone's memory will be retained for one minute after the battery pack is removed. This includes all setup information, last number dialed, memory dial locations stored, SpeedDial programming, and the CID list. •Even when the battery pack is not being used, it will gradually discharge over a long period of time. For optimum performance, be sure to return the handset to the base unit after a telephone call.
CLEANING THE BATTERY CONTACTS
To maintain a good charge, clean all charging contacts on the handset about once a month with a damp cloth. DO NOT use liquids or solvents; you may damage your phone.
10