AUTOMATIC DIGITAL CODE SECURITY
The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary. The first time you charge your handset, the security code is automatically set. In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code.
1)Remove the handset from the base unit. Press and hold PAGE on the base.
2)While holding PAGE, place the handset on the base unit. Leave the handset on the base for more than 3 seconds. A new random security code is set.
NOTE: If the handset battery pack is completely discharged or the battery pack is removed, the digital security code will be lost. If this happens, a new
security code is set automatically next time the battery pack is charged.
VOICE MAIL WAITING INDICATOR
If you subscribe to voice mail service, you can use your cordless telephone to access your voice mailbox. The CHARGE/IN USE LED on the base of your phone flashes whenever you have messages waiting in your
voice mailbox.
Just dial the access number supplied by your voice mail provider to enter your mailbox.
You can program your voice mail access number to a speed dial number.
If the voice mail waiting indicator remains on after you have retrieved your messages, press and hold the PAGE key for 5 seconds. This will reset the indicator.
NOTE: You must subscribe to voice mail service from your telephone company in order to use this feature. The voice mail company will provide you with the access number.
HEADSET INSTALLATION
Your phone may be used with an optional headset, Parts # 91000B. To use this feature, insert headset plug into the headset jack. Your phone is ready for
12