EDITING A STORED NAME AND/OR PHONE NUMBER
1) Press MEM, “Select Memory” | S e l e c t M e m o r y | |
0 1 | B o b b y | |
is displayed. | 0 2 | S O N I G E M |
2)Press 
/VOL and 
/VOL, or enter a number (0 - 9) to select the memory location you would like to edit.
3) Press SELECT twice. The following screen | E d i t M e m o r y 0 2 | |
appears with the memory location number | ||
D e l e t e M e m o r y 0 2 | ||
that you have selected on the display. | G o B a c k |
4)Press 
/VOL or 
/VOL to select “Edit MemoryXX” then press SELECT. The following screen appears.
The cursor flashes indicating that the display
is ready for the name to be edited. When a name has not been stored, the cursor appears at the beginning of the second line.
5)Use the number keys, 
/TONE/ 
, #/ 
, or CH/DELETE to edit the name. (See page 15.)
To edit only the phone number, skip this step.
6)Press SELECT.
The following screen appears.
The cursor flashes indicating that the display is ready for the number to be edited.
7)Use the number key, 
/TONE/ 
, #/ 
, PAUSE/REDIAL or CH/DELETE to edit the phone number. The phone number cannot exceed 20 digits. (See page 15.) If you don’t want to change the phone number, skip this step.
8)Press MEM. A confirmation screen appears. If it is correct, press 
/VOL to select “Yes” and press SELECT. The handset beeps and displays the confirmation screen.
The memory storage is complete. For example, if you store a name and number into memory location number 1, the display shows “Memory01 Stored”. After about 2 seconds, Select Memory screen is displayed.
9)Press END to return to standby mode.
R e p l a c e M e m o r y Y e s
N o
M e m o r y 0 2 | S t o r e d | ||
0 1 | B o b b y |
|
|
0 2 | S O N I G E M |
| |
0 3 | M O M A N D | D A D | |
19