If you make a mistake while entering a name:
Use 
/TONE/ 
or #/ 
to move the cursor to the incorrect character. Press CH/DELETE to erase the wrong character, then enter the correct character. To delete all characters, press and hold CH/DELETE.
For example, to enter Bobby:
1)Pick up the handset. Press MEM.
2)Enter a number or press 
/VOL, 
/VOL to select a memory location number.
3)Press SELECT twice.
4)Press 2 twice.
5)Press 6 six times.
6)Press 2 five times, then press #/ 
to move the cursor to the right.
NOTE: If the next character uses the same number key, you must press #/ 
to move the cursor over. Otherwise the next time you press the number key, it changes the character that was previously set.
7)Press 2 five times.
8)Press 9 seven times.
9)When finished, press SELECT.
To continue to store the telephone number, proceed to step 6 on page 15.
MAKING CALLS WITH MEMORY DIALING
MEMORY DIALING FROM STANDBY MODE
1) Press MEM. The handset displays your programmed memory locations.
2) Press /VOL and /VOL, or enter the | S e l e c t M e m o r y | |
number (0 - 9) to select the memory | 0 1 | B o b b y |
location you would like to dial. | 0 2 | S O N I G E M |
3)Press TALK/FLASH. “Talk” and the
volume setting appear on the display. Then the displayed number is dialed.
17