
CALL WAITING
If you have “call waiting” service and a call waiting tone sounds while you are on a call, press TALK/FLASH to accept the waiting call. There is a short pause, then you will hear the new caller. To return to the original caller, press TALK/FLASH again.
USING REDIAL
PAUSE/REDIAL calls the last number dialed. The redialed number can be up to 32 digits long.
SELECTING A DIFFERENT CHANNEL
If you encounter interference while using your phone, you can manually change the channel for clearer operation. This function works only when the phone is in use.
During the course of a conversation, if you hear static or noise which makes it difficult to hear, press CH/DELETE. The following screen appears. The phone then changes to a different channel.
CHAIN DIALING
On certain occasions after dialing a number, you may be requested to enter an access code, such as your account number. You can enter this number into a memory location for later use by doing the following.
1)Store the access code into one of the memory locations
2)Dial the party or service main number.
3)When you need to enter the special number, press MEM followed by the memory location
14