VTech CS2111-11, CS2112 Date and time, Event of a power failure, the time may need to be reset

Page 11

Telephone settings

Date and time

If you subscribe to caller ID service, the date and time will be set automatically with the next incoming call. If you do not have caller ID service, you can set the date and time manually.

1.Press PROG when the handset is in idle mode.

2.Press or until DATE/TIME is displayed. Press SELECT.

3.When the hour is flashing, press or until the screen displays the correct hour and then press SELECT.

4.When the minute is flashing, press or until the screen displays the correct minute and then press SELECT.

5.When AM or PM is flashing, press or to choose AM or PM and then press

SELECT.

6.When the month is flashing, press or until the screen displays the correct month and then press SELECT.

7.When the date is flashing, press or until the screen displays the correct date and then press SELECT.

8.You will hear a confirmation tone.

•In the event of a power failure, the time may need to be reset.

Telephone settings

www.vtechphones.com

Image 11

Contents User’s manual Congratulations Table of contents Iii Telephone base Parts checklistHandset Power adapter Cover Battery Telephone baseDSL filter not included for DSL users Telephone line cord Telephone base installationBattery installation and charging Wall mounting Press to store a programming option or a directory entry Press to scroll down while in programming modePress to scroll up while in programming mode Handset layoutPress to page the handset Telephone base layoutDate and time Event of a power failure, the time may need to be resetRinger Ringer volumeHome area code Dial modeLanguage Clear voicemail End calls VolumeMake calls Answer callsTemporary tone dialing Call waitingFind handset RedialStore a directory entry DirectoryCharacter chart Review the directory Edit a directory entry Delete a directory entry Dial a number from the directory Copy a directory entry into speed dialStore a speed dial entry Speed dialCursor appears at the end of the name. Use the dial pad Edit a speed dial entryDial a speed dial number Delete a speed dial entryReassign speed dial locations About caller ID Call log Make a call log entry ready to dial Review the call logDial a call log number Save a call log entry to the directory Delete an entry Delete from the call logCaller is blocking the name and number information Call log display screen messagesCaller is blocking the telephone number information Handset display screen messages Battery Important safety instructions Telephone base for 16 hours TroubleshootingMy telephone does not Work at all Handset to the telephone base after useTelephone company Telephone base and charge for 16 hoursNot accept charge Place Incoming callCannot dial out First, try all the above suggestions See Dial mode on page 9 to set the dial typeCharges may apply When I am usingMy calls cut in and out Apart from each other, or use a different surge protectorKeys or buttons work Using the telephoneHear other calls when Caller ID during call ID serviceSystem does not Receive caller ID, or CompanyMy cordless handset Caller ID entries do notTo dial Numbers before dialing or saving the telephone numberCommon cure for Operating range MaintenanceAbout cordless telephones WarrantyHow do you get warranty service? FCC Part FCC, Acta and IC regulationsRbrc seal Technical specifications Index Appendix 91-001545-050-100