VTech CS2112, CS2111-11 user manual Ringer volume

Page 12

If the ringer volume is set to off, RINGER OFF will be displayed.

Even if the ringer is set to off, the handset will still ring when you press

FIND HANDSET.

Telephone settings

Ringer

You can select from the different ringers.

1.Press PROG when the handset is in idle mode.

2.Press or until the screen displays RINGER: and the current setting.

3.Press SELECT. The current setting flashes, and you will hear a sample of the ringer.

4.Press or to select RINGER: 1, 2, 3 or 4. You will hear a sample of each ringer.

5.Press SELECT to confirm your selection. You will hear a confirmation tone.

Ringer volume

You can change the ringer volume to a comfortable level or turn the ringer off.

1.Press and holdoruntil the screen displays RINGER VOL: and the current setting when the handset is in idle mode. You will hear a sample of the ringer volume.

-OR-

Press PROG when the handset is in idle mode. Press or until the screen displays RINGER VOL: and the current setting.

Press SELECT. The current setting flashes, and you will hear a sample of the ringer volume.

2.Press or to select ringer volume from OFF, LOW or HI. You will hear a sample of the selected volume level.

3.Press SELECT to confirm your selection. You will hear a confirmation tone.

www.vtechphones.com

Image 12
Contents User’s manual Congratulations Table of contents Iii Parts checklist Handset Power adapter CoverBattery Telephone base Telephone baseTelephone base installation DSL filter not included for DSL users Telephone line cordBattery installation and charging Wall mounting Press to scroll down while in programming mode Press to scroll up while in programming modeHandset layout Press to store a programming option or a directory entryTelephone base layout Press to page the handsetEvent of a power failure, the time may need to be reset Date and timeRinger volume RingerDial mode Home area codeLanguage Clear voicemail Volume Make callsAnswer calls End callsCall waiting Temporary tone dialingRedial Find handsetDirectory Store a directory entryCharacter chart Review the directory Edit a directory entry Delete a directory entry Copy a directory entry into speed dial Dial a number from the directorySpeed dial Store a speed dial entryEdit a speed dial entry Cursor appears at the end of the name. Use the dial padDelete a speed dial entry Dial a speed dial numberReassign speed dial locations About caller ID Call log Review the call log Make a call log entry ready to dialDial a call log number Save a call log entry to the directory Delete from the call log Delete an entryCall log display screen messages Caller is blocking the telephone number informationCaller is blocking the name and number information Handset display screen messages Battery Important safety instructions Troubleshooting My telephone does notWork at all Handset to the telephone base after use Telephone base for 16 hoursTelephone base and charge for 16 hours Not accept chargeTelephone company Incoming call PlaceSee Dial mode on page 9 to set the dial type Cannot dial out First, try all the above suggestionsWhen I am using My calls cut in and outApart from each other, or use a different surge protector Charges may applyUsing the telephone Hear other calls whenKeys or buttons work ID service System does notReceive caller ID, or Company Caller ID during callCaller ID entries do not To dialNumbers before dialing or saving the telephone number My cordless handsetCommon cure for Maintenance Operating rangeWarranty About cordless telephonesHow do you get warranty service? FCC, Acta and IC regulations FCC PartRbrc seal Technical specifications Index Appendix 91-001545-050-100