Getting started
Handset layout
/VOL-/CID
•When the telephone is not in use, press to review the call log.
•Press and hold to adjust the ringer volume when in idle mode.
•During a call, press to decrease the listening volume. A double beep will sound at the lowest setting.
•Press to scroll down while in programming mode.
/FLASH
•Press to make or answer a call.
•During a call, press to receive an incoming call when you receive a call waiting alert.
PROG
• Press to enter programming mode while the telephone is not in use.
TONE*
• Press to switch to tone dialing temporarily when using pulse (rotary) service (page 13).
CHAN/DELETE
•Switch to a clearer channel while on a call.
•Press and hold to delete all records in the call log when in idle mode.
•When reviewing the call log or redial list, press to delete the displayed record.
SELECT
•Press to store a programming option or a directory entry.
/VOL+/
•Press to display the directory when the telephone is not in use.
•Press and hold to adjust the ringer volume when the telephone is not in use.
•During a call, press to increase the listening volume. A double beep will sound at the highest setting.
•Press to scroll up while in programming mode.
OFF
•During a call, press to hang up.
•Press and hold for two seconds when the telephone is not in use to erase the MISSED CALLS display.
•During programming, press to exit without making
# changes.
•Press repeatedly to display other dialing options when reviewing the call log (page 27).
•Press to enter the CLR VOICEMAIL submenu while in the menu.
REDIAL/PAUSE
•Press repeatedly to review the redial list.
•While dialing or entering numbers into the directory, press to insert a dialing pause.
Getting started
www.vtechphones.com