VTech CS2111-11, CS2112 user manual Dial mode, Home area code

Page 13

Telephone settings

Dial mode

If you have touch tone service, the telephone is ready for use as soon as the battery is charged. If you have pulse (rotary) service, you will need to change the dial mode.

1.Press PROG when the handset is in idle mode.

2.Press or until the screen displays DIAL MODE: and the current setting.

3.Press SELECT. The current setting flashes.

4.Press or to select TONE or PULSE.

5.Press SELECT to confirm your selection. You will hear a confirmation tone.

Home area code

If you dial your local calls using only seven digits (no area code required), program your home area code following the steps below. By programming your home area code, caller ID will display only the phone number without area code when you receive calls from callers in your local area.

1.Press PROG when the handset is in idle mode.

2.Press or until the screen displays HOME AREA CODE.

3.Press SELECT. The stored area code is displayed with the first digit flashing.

4.Use the dial key pad to enter the desired home area code.

5.Press SELECT to confirm. You will hear a confirmation tone.

•If, in the future, your phone service provider requires you to dial the area code when making a local call, or you want to cancel the home area code you have already programmed, reprogram your home area code to 000.

Telephone settings

www.vtechphones.com

Image 13

Contents User’s manual Congratulations Table of contents Iii Handset Power adapter Cover Parts checklistBattery Telephone base Telephone baseDSL filter not included for DSL users Telephone line cord Telephone base installationBattery installation and charging Wall mounting Press to scroll up while in programming mode Press to scroll down while in programming modeHandset layout Press to store a programming option or a directory entryPress to page the handset Telephone base layoutDate and time Event of a power failure, the time may need to be resetRinger Ringer volumeHome area code Dial modeLanguage Clear voicemail Make calls VolumeAnswer calls End callsTemporary tone dialing Call waitingFind handset RedialStore a directory entry DirectoryCharacter chart Review the directory Edit a directory entry Delete a directory entry Dial a number from the directory Copy a directory entry into speed dialStore a speed dial entry Speed dialCursor appears at the end of the name. Use the dial pad Edit a speed dial entryDial a speed dial number Delete a speed dial entryReassign speed dial locations About caller ID Call log Make a call log entry ready to dial Review the call logDial a call log number Save a call log entry to the directory Delete an entry Delete from the call logCaller is blocking the telephone number information Call log display screen messagesCaller is blocking the name and number information Handset display screen messages Battery Important safety instructions My telephone does not TroubleshootingWork at all Handset to the telephone base after use Telephone base for 16 hoursNot accept charge Telephone base and charge for 16 hoursTelephone company Place Incoming callCannot dial out First, try all the above suggestions See Dial mode on page 9 to set the dial typeMy calls cut in and out When I am usingApart from each other, or use a different surge protector Charges may applyHear other calls when Using the telephoneKeys or buttons work System does not ID serviceReceive caller ID, or Company Caller ID during callTo dial Caller ID entries do notNumbers before dialing or saving the telephone number My cordless handsetCommon cure for Operating range MaintenanceAbout cordless telephones WarrantyHow do you get warranty service? FCC Part FCC, Acta and IC regulationsRbrc seal Technical specifications Index Appendix 91-001545-050-100