VTech CS2111-11, CS2112 user manual Speed dial, Store a speed dial entry

Page 25

Telephone operation

Speed dial

Your telephone can store up to nine telephone numbers with names (up to 14 characters and 24 digits in each location) in designated speed dial memory locations.

Store a speed dial entry

1.Press PROG when the handset is in idle mode and then press or until the screen displays SPEED DIAL.

2.Press SELECT. The screen displays ENTER 1-9.

3.Press a key (1 through 9) to assign the speed dial location where this number will be stored. The screen displays ENTER NAME.

4.Use the dial pad keys to enter the name (see the Character chart on page 16) and then press SELECT or prog .

•Press to backspace and erase.

•Press to advance.

5.The screen displays ENTER NUMBER.

6.Use the dial pad keys to enter the telephone number, and then press SELECT or prog.

•Press to backspace and erase.

•Press REDIAL/PAUSE to insert a dialing pause (P will be displayed).

7.The screen displays DISTINCT RING? and the current setting.

•The entries stored in the speed dial memory will be numbered 01 through 09 and share the memory in the directory.

•Press OFF at any time to exit speed dial mode.

•If the location is not empty, the new entry will replace the old entry and the old entry will be moved to a directory location.

Telephone operation

www.vtechphones.com

21

Image 25

Contents User’s manual Congratulations Table of contents Iii Handset Power adapter Cover Parts checklistBattery Telephone base Telephone baseDSL filter not included for DSL users Telephone line cord Telephone base installationBattery installation and charging Wall mounting Press to scroll up while in programming mode Press to scroll down while in programming modeHandset layout Press to store a programming option or a directory entryPress to page the handset Telephone base layoutDate and time Event of a power failure, the time may need to be resetRinger Ringer volumeHome area code Dial modeLanguage Clear voicemail Make calls VolumeAnswer calls End callsTemporary tone dialing Call waitingFind handset RedialStore a directory entry DirectoryCharacter chart Review the directory Edit a directory entry Delete a directory entry Dial a number from the directory Copy a directory entry into speed dialStore a speed dial entry Speed dialCursor appears at the end of the name. Use the dial pad Edit a speed dial entryDial a speed dial number Delete a speed dial entryReassign speed dial locations About caller ID Call log Make a call log entry ready to dial Review the call logDial a call log number Save a call log entry to the directory Delete an entry Delete from the call logCaller is blocking the telephone number information Call log display screen messagesCaller is blocking the name and number information Handset display screen messages Battery Important safety instructions My telephone does not TroubleshootingWork at all Handset to the telephone base after use Telephone base for 16 hoursNot accept charge Telephone base and charge for 16 hoursTelephone company Place Incoming callCannot dial out First, try all the above suggestions See Dial mode on page 9 to set the dial typeMy calls cut in and out When I am usingApart from each other, or use a different surge protector Charges may applyHear other calls when Using the telephoneKeys or buttons work System does not ID serviceReceive caller ID, or Company Caller ID during callTo dial Caller ID entries do notNumbers before dialing or saving the telephone number My cordless handsetCommon cure for Operating range MaintenanceAbout cordless telephones WarrantyHow do you get warranty service? FCC Part FCC, Acta and IC regulationsRbrc seal Technical specifications Index Appendix 91-001545-050-100