VTech CS2112 Caller ID entries do not, To dial, My cordless handset, Other cordless telephones

Page 46

Troubleshooting

Problem	Suggestion

Caller ID entries do not	• Although the call log entries you receive have 10 digits, (the area code plus the seven-digit number), in
match the numbers I need	some areas, you may need to dial only seven digits, or a 1 plus the seven digits, or a 1 plus the area code
to dial.	plus the seven digits. You can change the number of digits that you dial or store from the call log.
	• While reviewing the call log, press # repeatedly to display these dialing options for local and long distance
	numbers before dialing or saving the telephone number.
My cordless handset	• Make sure the power cord is securely plugged into the telephone base. Plug the unit into a different
beeps and is not	working electrical outlet not controlled by a wall switch.
performing normally.	• Move the handset closer to the telephone base. It may be out of range.
	• Remove and re-insert the battery.
	• Reset the telephone base by unplugging the unit’s electrical power. Wait for 15 seconds and plug it back
	in again. Allow up to one minute for the handset and the telephone base to synchronize.
	• Other electronic products can cause interference to your cordless telephone. Try installing your telephone
	as far away from these electronic devices as possible: wireless routers, radios, radio towers, pager towers,
	cellular telephones, intercoms, room monitors, televisions, personal computers, kitchen appliances and
	other cordless telephones.

42	www.vtechphones.com

Image 46

Contents User’s manual Congratulations Table of contents Iii Battery Telephone base Parts checklistHandset Power adapter Cover Telephone baseTelephone base installation DSL filter not included for DSL users Telephone line cordBattery installation and charging Wall mounting Handset layout Press to scroll down while in programming modePress to scroll up while in programming mode Press to store a programming option or a directory entryTelephone base layout Press to page the handsetEvent of a power failure, the time may need to be reset Date and timeRinger volume RingerDial mode Home area codeLanguage Clear voicemail Answer calls VolumeMake calls End callsCall waiting Temporary tone dialingRedial Find handsetDirectory Store a directory entryCharacter chart Review the directory Edit a directory entry Delete a directory entry Copy a directory entry into speed dial Dial a number from the directorySpeed dial Store a speed dial entryEdit a speed dial entry Cursor appears at the end of the name. Use the dial padDelete a speed dial entry Dial a speed dial numberReassign speed dial locations About caller ID Call log Review the call log Make a call log entry ready to dialDial a call log number Save a call log entry to the directory Delete from the call log Delete an entryCaller is blocking the telephone number information Call log display screen messagesCaller is blocking the name and number information Handset display screen messages Battery Important safety instructions Work at all Handset to the telephone base after use TroubleshootingMy telephone does not Telephone base for 16 hoursNot accept charge Telephone base and charge for 16 hoursTelephone company Incoming call PlaceSee Dial mode on page 9 to set the dial type Cannot dial out First, try all the above suggestionsApart from each other, or use a different surge protector When I am usingMy calls cut in and out Charges may applyHear other calls when Using the telephoneKeys or buttons work Receive caller ID, or Company ID serviceSystem does not Caller ID during callNumbers before dialing or saving the telephone number Caller ID entries do notTo dial My cordless handsetCommon cure for Maintenance Operating rangeWarranty About cordless telephonesHow do you get warranty service? FCC, Acta and IC regulations FCC PartRbrc seal Technical specifications Index Appendix 91-001545-050-100