VTech CS2112, CS2111-11 user manual Telephone base installation

Page 6

•Use only the power adapter supplied with this product. To order a replacement, visit our website at www. vtechphones.com or call 1 (800) 595- 9511. In Canada, go to www.vtechcanada. com or call 1 (800) 267-7377.

•The power adapter is intended to be correctly oriented in a vertical or floor mount position. The prongs are not designed to hold the plug in place if it is plugged into a ceiling or an under-the- table/cabinet outlet.

Getting started

Telephone base installation

Install the telephone base as shown below. Make sure that the electrical outlet is not controlled by a wall switch. Also, if you receive high speed internet through your telephone line (commonly referred to as DSL), you may need to install a DSL filter to the telephone line between the telephone base and the telephone wall jack. Contact your DSL service provider for more information about DSL filters.

Telephone wall jack

DSL filter (not included) for DSL users

Telephone line cord

Telephone base power adapter

Electrical outlet (not controlled by a wall switch)

Telephone base

www.vtechphones.com

Image 6

Contents User’s manual Congratulations Table of contents Iii Battery Telephone base Parts checklistHandset Power adapter Cover Telephone baseTelephone base installation DSL filter not included for DSL users Telephone line cordBattery installation and charging Wall mounting Handset layout Press to scroll down while in programming modePress to scroll up while in programming mode Press to store a programming option or a directory entryTelephone base layout Press to page the handsetEvent of a power failure, the time may need to be reset Date and timeRinger volume RingerDial mode Home area codeLanguage Clear voicemail Answer calls VolumeMake calls End callsCall waiting Temporary tone dialingRedial Find handsetDirectory Store a directory entryCharacter chart Review the directory Edit a directory entry Delete a directory entry Copy a directory entry into speed dial Dial a number from the directorySpeed dial Store a speed dial entryEdit a speed dial entry Cursor appears at the end of the name. Use the dial padDelete a speed dial entry Dial a speed dial numberReassign speed dial locations About caller ID Call log Review the call log Make a call log entry ready to dialDial a call log number Save a call log entry to the directory Delete from the call log Delete an entryCall log display screen messages Caller is blocking the telephone number informationCaller is blocking the name and number information Handset display screen messages Battery Important safety instructions Work at all Handset to the telephone base after use TroubleshootingMy telephone does not Telephone base for 16 hoursTelephone base and charge for 16 hours Not accept chargeTelephone company Incoming call PlaceSee Dial mode on page 9 to set the dial type Cannot dial out First, try all the above suggestionsApart from each other, or use a different surge protector When I am usingMy calls cut in and out Charges may applyUsing the telephone Hear other calls whenKeys or buttons work Receive caller ID, or Company ID serviceSystem does not Caller ID during callNumbers before dialing or saving the telephone number Caller ID entries do notTo dial My cordless handsetCommon cure for Maintenance Operating rangeWarranty About cordless telephonesHow do you get warranty service? FCC, Acta and IC regulations FCC PartRbrc seal Technical specifications Index Appendix 91-001545-050-100