VTech CS2111-11, CS2112 user manual Review the call log, Make a call log entry ready to dial

Page 31

8005959511

18005959511

5959511

15959511

Telephone operation

Review the call log

1.Press /VOL-/CIDto view the call log when the handset is in idle mode.

2.Press or to scroll through the entries.

There will be an error tone when you reach the end of the call log list and the screen will display END OF LIST.

Make a call log entry ready to dial

Although the call log entries received have 10 digits (the area code plus the seven-digit number), in some areas, you may need to dial only seven digits, or a 1 plus the seven digits, or a 1 plus the area code plus the seven digits. You can change the number of digits that you dial or store from the call log.

While reviewing the call log, press # repeatedly to display these dialing options for local and long distance numbers before dialing or saving the telephone number. See the example on the right.

•If you have programmed a home area code (page 9), only the last seven digits of the incoming phone numbers from that area code will be displayed or dialed. Press # repeatedly to display all possible dialing options.

Telephone operation

www.vtechphones.com

27

Image 31

Contents User’s manual Congratulations Table of contents Iii Telephone base Parts checklistHandset Power adapter Cover Battery Telephone baseDSL filter not included for DSL users Telephone line cord Telephone base installationBattery installation and charging Wall mounting Press to store a programming option or a directory entry Press to scroll down while in programming modePress to scroll up while in programming mode Handset layoutPress to page the handset Telephone base layoutDate and time Event of a power failure, the time may need to be resetRinger Ringer volumeHome area code Dial modeLanguage Clear voicemail End calls VolumeMake calls Answer callsTemporary tone dialing Call waitingFind handset RedialStore a directory entry DirectoryCharacter chart Review the directory Edit a directory entry Delete a directory entry Dial a number from the directory Copy a directory entry into speed dialStore a speed dial entry Speed dialCursor appears at the end of the name. Use the dial pad Edit a speed dial entryDial a speed dial number Delete a speed dial entryReassign speed dial locations About caller ID Call log Make a call log entry ready to dial Review the call logDial a call log number Save a call log entry to the directory Delete an entry Delete from the call logCaller is blocking the telephone number information Call log display screen messagesCaller is blocking the name and number information Handset display screen messages Battery Important safety instructions Telephone base for 16 hours TroubleshootingMy telephone does not Work at all Handset to the telephone base after useNot accept charge Telephone base and charge for 16 hoursTelephone company Place Incoming callCannot dial out First, try all the above suggestions See Dial mode on page 9 to set the dial typeCharges may apply When I am usingMy calls cut in and out Apart from each other, or use a different surge protectorHear other calls when Using the telephoneKeys or buttons work Caller ID during call ID serviceSystem does not Receive caller ID, or CompanyMy cordless handset Caller ID entries do notTo dial Numbers before dialing or saving the telephone numberCommon cure for Operating range MaintenanceAbout cordless telephones WarrantyHow do you get warranty service? FCC Part FCC, Acta and IC regulationsRbrc seal Technical specifications Index Appendix 91-001545-050-100