VTech CS2112, CS2111-11 Hear other calls when, Using the telephone, Keys or buttons work

Page 44

Troubleshooting

Problem

Suggestion

 

 

I hear other calls when

• Disconnect the telephone base from the telephone jack. Plug in a different telephone. If there are still

using the telephone.

other calls, the problem is probably in the wiring or local service. Call your local telephone company.

 

• Press CHAN/DELETE to switch to a clearer channel when on a call.

 

 

I hear noise in the

• Make sure the telephone line cord is plugged in securely.

handset, and none of the

• Remove and re-insert the battery.

keys or buttons work.

 

 

 

40

www.vtechphones.com

Image 44
Contents User’s manual Congratulations Table of contents Iii Parts checklist Handset Power adapter CoverBattery Telephone base Telephone baseTelephone base installation DSL filter not included for DSL users Telephone line cordBattery installation and charging Wall mounting Press to scroll down while in programming mode Press to scroll up while in programming modeHandset layout Press to store a programming option or a directory entryTelephone base layout Press to page the handsetEvent of a power failure, the time may need to be reset Date and timeRinger volume RingerDial mode Home area codeLanguage Clear voicemail Volume Make callsAnswer calls End callsCall waiting Temporary tone dialingRedial Find handsetDirectory Store a directory entryCharacter chart Review the directory Edit a directory entry Delete a directory entry Copy a directory entry into speed dial Dial a number from the directorySpeed dial Store a speed dial entryEdit a speed dial entry Cursor appears at the end of the name. Use the dial padDelete a speed dial entry Dial a speed dial numberReassign speed dial locations About caller ID Call log Review the call log Make a call log entry ready to dialDial a call log number Save a call log entry to the directory Delete from the call log Delete an entryCaller is blocking the name and number information Call log display screen messagesCaller is blocking the telephone number information Handset display screen messages Battery Important safety instructions Troubleshooting My telephone does notWork at all Handset to the telephone base after use Telephone base for 16 hoursTelephone company Telephone base and charge for 16 hoursNot accept charge Incoming call PlaceSee Dial mode on page 9 to set the dial type Cannot dial out First, try all the above suggestionsWhen I am using My calls cut in and outApart from each other, or use a different surge protector Charges may applyKeys or buttons work Using the telephoneHear other calls when ID service System does notReceive caller ID, or Company Caller ID during callCaller ID entries do not To dialNumbers before dialing or saving the telephone number My cordless handsetCommon cure for Maintenance Operating rangeWarranty About cordless telephonesHow do you get warranty service? FCC, Acta and IC regulations FCC PartRbrc seal Technical specifications Index Appendix 91-001545-050-100