AltiGen comm 720 user manual Menu System Enter

Page 22

—CHECK MEMORY (RAM checking state)

—CHECK FW (Firmware checking state)

—INIT NETWORK

—LOADING FW...

—LOADING NOW.

—Boot Done

—INITIALIZING

4. Configure startup network settings. (To display the phone’s menu, as

required below, press the Menu button on the phone. Use the / buttons to scroll through the menus and settings in the LCD screen. Press the Enter button to select a menu item or a setting.)

If you are using DHCP, ensure that DHCP is enabled on the IP 720 phone: Menu > NETWORK > ENABLE DHCP > Yes. (DHCP is enabled by default.)

If your company does not use DHCP, disable DHCP on the IP 720 phone: Menu > NETWORK > ENABLE DHCP > No. In this case, configure the following network settings on the IP 720 after setting up the phone:

•Local IP address

•IP subnet mask

•Gateway IP address

5.Configure the MAXCS IP settings (see “Configuring IP Settings” on page 20 for information about IP settings):

a. Menu > SYSTEM >Enter.

b. Select AW SERVER, and press Enter.

c. Enter the MAXCS server address, using the * key to input periods, and press Enter.

6.Activate the IP 720 extension from the IP phone:

a. With the handset onhook, press #27, then the Enter button. b. Enter the extension number and password when prompted.

14IP 720 User Manual

Page 21 Page 23
Image 22
Page 21 Page 23
Contents IP 720 Phone Trademarks Contents User Guide Page Page Warranty What The Warranty CoversHow to Obtain Service About This Manual Related DocumentationPage IP 720 Phone 22 16 21 13Busy Lamp Field BLF key, an AltiServ Feature Logged in as an extension Page Feature Description Supported Telephony FeaturesHardware Items in the Package Page Single Call Waiting, Multiple Call Waiting or Live CallWhen Multiple Call Waiting is American Disabilities Act ADA Compliance Page Setting Up the IP 720 Phone Menu System Enter Miscellaneous Operation Notes RegisteringPage Phone Settings Configuring the IP 720 PhoneSetting Menu Path Description System Settings Network Settings Registration from the Phone’s MenuConfiguring IP Settings Updating Phone FirmwareSetting Ring Tones Workgroup Status Display Greeting ButtonActivity Button Page User Guide LCD ScreenBasic Phone Operation Function KEY SequenceConference Greeting BLF Feature Codes Making Calls Dialing an IP Number Directly from the IP Specifications Appendix aPower TroubleshootingDimensions Problem/Symptom SolutionAppendix a Troubleshooting LCD Messages Message ExplanationIP Phone Running Messages Message DefinitionIP Phone Boot Messages Troubleshooting Glossary Dual Tone Multi Frequency see DtmfPage Glossary Page Page Page Index
Top Page Image Contents