AltiGen comm 720 user manual Miscellaneous Operation Notes, Registering

Page 23

c.The phone will attempt to register, as shown in the LCD screen:

REGISTERING...

If the phone successfully passes through these stages, the phone shows the date, time, and extension in the LCD screen and is now in normal operating mode.

01/12

04:16PM

x300

 

 

 

If it doesn’t pass through these stages successfully, refer to “Troubleshooting” on page 34.

Miscellaneous Operation Notes

•Logging in and out—When using #26 and #27 to log out / log in, the IP 720 must be onhook. Pressing the Speaker button and then using #26 or #27 will not work.

•BASIC mode—If the IP 720 phone fails to register with MAXCS during startup, the phone operates in Basic mode. When in Basic mode, the IP phone’s LCD display shows (BASIC) IDLE.

No MAXCS switching features are available in this operating mode. However, the phone user can enter a destination IP address followed by #, and make an outgoing call through the IP network to reach MAXCS or another IP 720 phone. Also, the IP phone can accept incoming calls originating from MAXCS or another IP 720 phone.

If the IP phone’s local configuration is changed while in BASIC mode, the changes are overridden by MaxAdministrator settings.

•Incoming call takes priority—If a call comes in while you are using any phone menu or display (such as workgroup display or Call Log), the phone will exit the menu and go to the ring state.

•Restoring default settings—To automatically restore the original default settings for the IP 720 phone:

1.Press the Menu button.

2.Press * * 2, then press the Enter button.

IP 720 User Manual 15

Page 22 Page 24
Image 23
Page 22 Page 24
Contents IP 720 Phone Trademarks Contents User Guide Page Page What The Warranty Covers WarrantyHow to Obtain Service Related Documentation About This ManualPage 22 16 21 13 IP 720 PhoneBusy Lamp Field BLF key, an AltiServ Feature Logged in as an extension Page Hardware Items in the Package Supported Telephony FeaturesFeature Description Page Call Waiting or Live Call Single Call Waiting, MultipleWhen Multiple Call Waiting is American Disabilities Act ADA Compliance Page Setting Up the IP 720 Phone Menu System Enter Registering Miscellaneous Operation NotesPage Setting Menu Path Description Configuring the IP 720 PhonePhone Settings System Settings Registration from the Phone’s Menu Network SettingsUpdating Phone Firmware Configuring IP SettingsSetting Ring Tones Greeting Button Workgroup Status DisplayActivity Button Page LCD Screen User GuideFunction KEY Sequence Basic Phone OperationConference Greeting BLF Feature Codes Making Calls Dialing an IP Number Directly from the IP Appendix a SpecificationsProblem/Symptom Solution TroubleshootingDimensions PowerAppendix a Troubleshooting Message Explanation LCD MessagesMessage Definition IP Phone Running MessagesIP Phone Boot Messages Troubleshooting Dual Tone Multi Frequency see Dtmf GlossaryPage Glossary Page Page Page Index
Top Page Image Contents