Installation and Setup
Installation and Setup
The 6731i IP Phone can be setup to share a network connection with another network device. Power can be provided by the supplied power adapter or by an 802.3af compliant network power source or with a PoE inline power injector (optional accessory). If your System Administrator has already setup your phone, please refer to the Aastra 6731i User Guide for call handling information or contact your System Administrator.
Direct or Shared Network Connection
The phone can be set up as a direct network connection to the Ethernet wall jack or as a shared network connection as a
Direct Network Connection
Located at the top of the phone are two fully switched 10/100 BaseT Ethernet cable ports. The port marked with LAN is used to connect the phone to the network, as well as provide power to your phone (if required). See "Connecting to the Network and to Power" on page 10 for more information.
Network Jack
(if Inline power provided,
do not install the power adapter)
Separate
Network
Jack
Other Network Devices
Ethernet
Cable
Power Adapter |
|
Connection | To Network |
Power
Adapter
8Model 6731i IP Phone Installation Guide