AT&T 9465 manual Connect the telephone line cord, Power cord, Check for dial tone

Page 7

9465 book_1ATT 2/29/00 11:23 PM Page 5

	INSTALLATION
Modular	Standard
telephone	electrical outlet
jack

INSTALLATION

3Connect the telephone line cord.

If you are wall mounting the phone, use the

short line cord and press the excess cord	4 Connect the
into the groove on the bottom of the base.	power cord.

5Mount the base on the wall. (WALL MOUNTING ONLY) Hold the base so the mounting knobs on the standard wall jack will fit into the holes on the bottom of the base. Slide the base down onto the knobs until it locks into place.

6Charge the handset battery.

Place the handset face up or face down in the base.

Charge the battery at least 12 hours the first time. After the first charge, the battery will quick-charge in only six hours.

7Check for dial tone.

After the batteries are charged, lift the handset and press P; you should hear a dial tone.

8Set up Telephone features. See pages 6 and 7.

9Set up Caller ID features. See pages 8 and 9.

10Set up Answering System features. See pages 10–13.

11Set up Caller Specific Outgoing Announcements. See pages 14–16.

5

Image 7

Contents Book1ATT 2/29/00 1123 PM Part 1 Important Product Information Revised 2/29/00Contents Book1ATT 2/29/00 1123 PM Before You Install InstallationInstall the handset battery Table/Desk and Wall InstallationAttach belt clip to the cordless handset optional Check for dial tone Power cordConnect the telephone line cord ConnectSoftkeys Feature SetupMessage Window Display Handset Ringer Telephone Feature SetupDial Mode Ringer Off / Battery SaveProgram Home and Local Area Codes Caller ID Feature SetupCall List Options Caller ID with Call WaitingSetup Answering System Feature SetupRing Select / Toll Saver Select Your AnnouncementAudible Message Alert Record Your Announcement from the Base Change Remote Access CodeReview Feature Settings Change Priority Calling CodeSet the Clock Delete an AnnouncementMenu Intcm SPEC-ANN Specific Annc View ADD Caller Specific Outgoing Announcement Feature SetupReview Caller Specific Outgoing Announcements Delete a Caller Specific Outgoing Announcement Telephone Operation Redial Plus RedialTemporary Tone To return to the call, select Unhold MuteHold IntercomHeadset Jack Record a Phone ConversationAT the Base Speaker Volume Base Ringer VolumeHandset Locator Page/IntercomStore a Number in Memory from the Handset Telephone MEMORY/DIRECTORYPriority Ring Talking Caller IDStep Memory / DirectoryReplace a Stored Number Store a Pause in a Memory NumberStore a Name with a Memory Number Dial a Memory Number Store a Talking Caller ID Announcement with a Memory NumberDelete Memory Numbers View Memory NumbersReview Talking Caller ID Edit Memory NumbersCall History in Telephone Memory Announcement Play/Silent Audible IndicatorsAnswering System Operation About MailboxesRecord a Memo Answering CallsCall Screening/Intercept Announcement BypassListen to, Save & Delete Messages CL ↔ AO From a Touch Tone Phone Call ScreeningConnect with the Answering System From the Cordless HandsetRemote Access Commands Set the Clock End remote access callSelect an Outgoing AnnouncementVoice Help Menu Audible SignalsAbout Caller Identification Caller ID OperationMemory Match Call WaitingIncoming Call History Mailbox LinkDisplay Dial Review Call HistoryDelete a Specific Call Record Delete Call Records from Call HistoryDelete All Call Records Caller ID Display MessagesOperating Range Charge the Handset Battery Pack Battery LifeBatteries Batteries Replace the Handset Battery Pack To re-initialize the handset and base Case of DifficultyIf the phone does not work at all, check these items first If you have no dial toneIf the phone does not ring when you receive a call If you hear noise or interference when using the phoneIf the caller’s name or phone number is not displayed If messages are incomplete If speakerphone conversation sounds distortedIf you have difficulty hearing messages If your outgoing announcement isn’t clear If CL appears in the Message WindowIndex Index Answering System Remote CommandsRemote Command Press