Nortel Networks i2021 Series manual Dialing from the Call LOG

Page 59

i2021 ISDN Teleset

VIEWING THE CALL LOGS WITH CALLING PARTY NUMBER ONLY To access the call records observe the following directions. From the startup screen press the CalLog, or NewLog softkey.

Choose Unans to view the unanswered calls, Answer to view calls that were answered, or Outgoing to view calls that were originated.

Press CalLog, Unans. If a call has been logged with a Name, the display will show

The Prev key is used to scroll through the entries.

Pressing the Time key will display the date and time the call was logged.

NOTE: In order for the logged call’s Time to be correct, the Clock must be set correctly in the i2021Teleset.

The Edit softkey allows modifying the telephone number for dialing.

To delete a logged call, press Clear.

DIALING FROM THE CALL LOG

Outgoing calls can be dialed directly from the Call Logs. This is handy when you want to return a missed call.

In most cases, with unanswered and answered logs, it will be necessary to edit the telephone number before dialing. Editing includes, removing an area code or adding prefix digits such as a 9 or a 1.

53

Image 59

Contents I2021 Series Isdn Teleset Users Guide Page Trademark Acknowledgment Mandatory Customer InformationFederal Communications Commission FCC Requirements, Part Important Safety Instructions Table of Contents Table of Figures About This Manual FeaturesIntroduction Isdn i2021 S/T TelesetsRinger Controls Voice Operation FeaturesVolume Control Touchtone Keypad AccessoriesMULTI-LANGUAGE Isdn Interfaces InstallationParts List TR Switch Line and Power Connections i2021 TelesetSwitch Settings Power SwitchTerminating Resistors PS1/PS2 Switch SettingsPassive-Bus or Multipoint Point-to-Point CircuitsService Profile Identifier Spid Line ConfigurationCall Appearance Keys FeaturesSwitch Type Directory NumberInstalling the Logo Plate Assembling Softkeys AUTO-INSTALL Connecting the i2021- AUTO-INSTALLAUTO-SWITCH AUTO-SPID AUTO-SPID ProceduresAUTO-DOWNLOAD Connecting the i2021- MANUAL-INSTALLManually Choosing the Switch Type Manually Entering the Spid Press MENU, MORE, MORE, Config, MORE, MORE, SpidManually Programming Call Appearances Manual Switch DownloadingPage Page Page Manually Programming Feature Keys I2021 Isdn Teleset Setting the Contrast Setting Up the TelesetAdjusting the Display Viewing Angle Setting the Backlighting Options Setting the Date and Time Clock Ringing Patterns Page Primca Primary Call Appearance 2ND RingPage Confca Conference Call Appearance Priort CA Priority Call AppearanceIntercom Speed Dial KEY Assignment Page Editing a Speed Dial Number Setting the Alarm Time Press MENU, Alarm Setting Protection Levels Password SelectionThere are Three Levels of Password Protection Page Changing the Display Language Changing the Language on Keycaps and DisplayEnglish French Spanish Changing the KeycapsTerms and Nomenclature Non-Programmable Hardkeys and IndicatorsOperations Voice OperationDisplay Window and Menus Dialing ON-HOOK Placing CallsAnswering Incoming Calls Dialing OFF-HOOKCalling Party Number Display InformationTransfer, Conference and Drop Hold KeyWAY Conferencing Conferencing TWO Outgoing Calls Transferring Incoming CallsConferencing TWO Incoming Calls Conferencing AN Incoming Call to AN Outgoing CallConferencing AN Outgoing Call to AN Incoming Call Drop Feature Directory Changes Teleset FeaturesRedial DirectoryPage Call Records Viewing the Call Logs with Calling Party Name and Number Dialing from the Call LOG Saving a Callog Entry to the Directory Page DSS/BLF Operation Advanced FeaturesDSS/BLF Direct Station Select, Busy Lamp Field Tsms Not Available in this Release Disabling SoftkeysPage Key Mapping Inspect Inspect or VIEW? ViewProtecting Keys from Being Overwritten Protecting Specific Keys from an Automatic Download Disabling the Automatic DownloadKey Clicks Disable LoggingTesting Disable Call Logs on Shared Call AppearanceCode Error Type Meaning Loading FW Troubleshooting ProblemsMaintaining the Teleset Checking the FW VersionCAN’T SET Call Appearances Back to Primca CAN’T SET DSS/BLF, CONFCA, or Other CA TypesGlossary Page Auto IndexRedial Iii