Aiphone IS operation manual Communication, Transferring

Page 12

Communication

On a sub station (door station or room sub station), you can call up to 20 preset master stations in your site at the same time. Or you can call up to 19 master stations in your site and a remote site (up to 20 master stations at the remote site).

On a master station (IS-MV), you can select a call from the list of incoming calls and answer it.

On a master station, the communication method can be selected from the hands-free mode, the press-to-talk mode, or using the

handset. (→P. 22)

You can also communicate with a remote site (the pilot station registered in the site).

Door station

Room sub station

Master station

Communication

or

 

 

 

 

Communication

 

 

Target

 

 

Operation

In your site

In a remote site

In a remote site

 

 

(standard (IP)

(standard (IP)

(network direct

 

 

system)

system)

system)

 

Calling

 

Communication

Master station

: Possible

 

 

 

 

Hands-free

Press-to-talk

Using the handset

Transferring

When communicating with a received call on a master station, you can transfer it to another master station in your site. (→P. 26)

Door station

Room sub station

Master station

Master station

or

Call

Transfer

*You can also make a transfer setting for transferring calls to a designated master station automatically.

*For a call from another master station, you can transfer it when you are communicating with it (not to the remote site).

*You can also transfer a call to a remote site. (However, you cannot transfer a call received from a remote site to another remote site.)

*You cannot transfer a communication to a remote site.

 

 

Target

 

Operation

In your site

In a remote site

In a remote site

 

(standard (IP) system)

(standard (IP) system)

(network direct system)

Communication transferring

 

 

 

 

Call transferring (automatic)

 

 

 

 

Scheduled call transferring (automatic)

 

 

 

 

: Possible :Impossible

 

 

 

12

Image 12
Contents Standard IP System 834174 B P0811JZContents Calling another station Direct voice call Monitoring Viewing video images at Target station Paging Chime pagingPrecautions General PrecautionsIntroduction Unit becomes inoperative during power failure Part Names Color monitor master stationMonitor Display item examplesStandby mode Display examplesVandal-resistant door station Vandal-resistant audio door station flush-mount IS-SSRoom sub station IS-RS Transmit LED redOutline of Operations IS-CCUCommunication You cannot monitor or scan-monitor a remote site Electric door strike Door station Room sub station Master Station Settings and Adjustments Setting itemsAdjusting screen brightness Brightness Adjusting sound volume Tone VOLInitial settings Initial Setting Basic setting procedureSetting the call-in tones Door Call Tone Room SUB Call ToneSetting the display modes of the monitor Display You can make the following settings for the display modesPress to select the desired search item so that Sub items are displayedTransfer Delay Call TransferSchedule Transfer Privacy Mode Telephone TransferPRIVACY-2 Call Tone Receiving a call Call tone rings, and the corresponding display appearsLights up Communication in the hands-free mode Communication in the press-to-talk modeWhen called in from a sub station Answer the call in one of the following waysCommunication by using the handset When two or more calls have arrived IS-MVHands-free mode Press-to-talk modeSwitching Zoom/Wide Viewing video images at a video door stationPan & Tilt Wide ZoomAdjusting images Press Adjust when the image is difficult to seeTo restore the image before adjustment Press Adjust againWhen both 1 and 3 are set, 3 takes priority Communication transferringCall transferring While receiving a call To communicate with the callerStandby mode Search itemsStations by Area →P Placed Calls →P Name Search →P Received Calls →PSearch List Name Search →P Stations by Area →P Stations by Type →PPaging Zone →P Chime Zone →P Remote Site →PWhen searching for MASTER004 Press the dial keys as follows Searching for a station, zone or remote site from the listPress You cannot select two or more remote sitesSelect Stations by Type from the Search LIST. →P All the stations in the area are displayed in the listYou can select up to 5 stations. →P All the station types are displayed in the listRemote Site Placed Calls Press to select Placed Calls in the standby mode. →PPress to select Received Calls in the standby mode. →P You can select up to 5 stations and/or zones. →PPage Calling another station direct voice call Press OFF or hang up the handset to finish communicatingViewing video images at the target station MonitoringScan-monitoring To shift to scan-monitoringMaking chime paging automatically Other Functions Communicating with telephone North America onlyOther functions combined with connected external devices Room sub stationCentral control unit It is also possible to set to stop the current chime pagingTechnical Precautions Available Character ListSpecifications Vandal-resistant video door station surface-mount IS-DV Vandal-resistant video door station flush-mount IS-DVFIP vandal-resistant video door station flush-mount IS-IPDVF Vandal-resistant audio door station flash-mount IS-SSPower supply unit IS-PU-UL, IS-PU-S Warranty For US marketObject area of is the EU For Canada market
Related manuals
Manual 28 pages 11.84 Kb