Aiphone IS Other functions combined with connected external devices, Room sub station

Page 39

Sending e-mails

You can send e-mails to the designated mail addresses in the following events.

•When calling

•When a calling is unsuccessful

•When a error occurs among units

•When the system starts up

Each of these events that has occurred in the previous 60 seconds is summarized and sent in an e-mail.

*To use this function, you need to register mail addresses in the System settings on a PC in advance.

An example of e-mail contents

[Title]: System name [Body]:

Call: Call <Priority>, <Station number>, <Station name> Error:

For stations: Error <Station number>, <Station name> Start-up: System start <System name>

NOTES:

•The mail title and texts cannot be changed.

•When there is a door call at an IP video door station, an e-mail will be sent with a snapshot (QVGA JPEG) at the station attached.

•An e-mail will not be sent for paging and chime paging.

•The body of the message is only in English.

Other functions (combined with connected external devices)

■Activating room sub stations and central control units by detecting contact input

You can set room sub stations and central control units to perform the designated operations when detecting an external input. Operations differ from the settings in the System setting on a PC.

Room sub station

(Example 1: when the action is set to call with an appropriate priority)

When a sensor connected to the room sub station detects abnormality or a connected call button is pressed, the room sub station calls the designated master stations and/or a remote site.

Room sub station

Master station

 

Call

Sensor

 

Input

Answer

 

An intruder

(Example 2: when the action is set to answer the page)

When receiving paging from a master station, by inputting an external signal (for example, by pressing an external button connected to the room sub station), answering the page can be possible.

Central control unit

(Example: when the trigger condition is set to broadcast chime)

When a sensor connected to the central control unit detects abnormality or a connected external button is pressed, the central control unit transmits a chime to the set zone.

*It is also possible to set to stop the current chime paging.

■Activating an external device by detecting the designated action

You can set central control units, add-on control units and room sub control units to activate the connected external devices when detecting the designated action: a call with an appropriate priority, door release, external sound input (central control unit only) or PA output. The trigger condition can be designated by the settings in the System setting on a PC.

GETTING STARTED SETTING AND ADJUSTMENT USING THE SYSTEM

APPENDIX

39

Page 38 Page 40
Image 39
Page 38 Page 40
Contents 834174 B P0811JZ Standard IP SystemContents Viewing video images at Target station Paging Chime paging Calling another station Direct voice call MonitoringPrecautions General PrecautionsIntroduction Unit becomes inoperative during power failure Color monitor master station Part NamesDisplay item examples MonitorDisplay examples Standby modeVandal-resistant audio door station flush-mount IS-SS Vandal-resistant door stationTransmit LED red Room sub station IS-RSIS-CCU Outline of OperationsCommunication You cannot monitor or scan-monitor a remote site Electric door strike Door station Room sub station Setting items Master Station Settings and AdjustmentsAdjusting sound volume Tone VOL Adjusting screen brightness BrightnessRoom SUB Call Tone Initial settings Initial SettingBasic setting procedure Setting the call-in tones Door Call ToneSub items are displayed Setting the display modes of the monitor DisplayYou can make the following settings for the display modes Press to select the desired search item so thatTransfer Delay Call TransferSchedule Transfer Privacy Mode Telephone TransferPRIVACY-2 Call Tone Receiving a call Call tone rings, and the corresponding display appearsLights up Answer the call in one of the following ways Communication in the hands-free modeCommunication in the press-to-talk mode When called in from a sub stationPress-to-talk mode Communication by using the handsetWhen two or more calls have arrived IS-MV Hands-free modeWide Zoom Switching Zoom/WideViewing video images at a video door station Pan & TiltPress Adjust again Adjusting imagesPress Adjust when the image is difficult to see To restore the image before adjustmentWhen both 1 and 3 are set, 3 takes priority Communication transferringCall transferring To communicate with the caller While receiving a callName Search →P Received Calls →P Standby modeSearch items Stations by Area →P Placed Calls →PRemote Site →P Search ListName Search →P Stations by Area →P Stations by Type →P Paging Zone →P Chime Zone →PYou cannot select two or more remote sites When searching for MASTER004 Press the dial keys as followsSearching for a station, zone or remote site from the list PressAll the station types are displayed in the list Select Stations by Type from the Search LIST. →PAll the stations in the area are displayed in the list You can select up to 5 stations. →PRemote Site You can select up to 5 stations and/or zones. →P Placed CallsPress to select Placed Calls in the standby mode. →P Press to select Received Calls in the standby mode. →PPage Press OFF or hang up the handset to finish communicating Calling another station direct voice callTo shift to scan-monitoring Viewing video images at the target stationMonitoring Scan-monitoringMaking chime paging automatically Communicating with telephone North America only Other FunctionsIt is also possible to set to stop the current chime paging Other functions combined with connected external devicesRoom sub station Central control unitAvailable Character List Technical PrecautionsSpecifications Vandal-resistant audio door station flash-mount IS-SS Vandal-resistant video door station surface-mount IS-DVVandal-resistant video door station flush-mount IS-DVF IP vandal-resistant video door station flush-mount IS-IPDVFPower supply unit IS-PU-UL, IS-PU-S Warranty For US marketObject area of is the EU For Canada market
Related manuals
Manual 28 pages 11.84 Kb
Top Page Image Contents