Aiphone IS operation manual While receiving a call, To communicate with the caller

Page 27

Door release

You can release the door lock while being called from, communicating with, or monitoring a sub station if a door release device is connected to the station.

Press while being called from, communicating with, or monitoring the sub station.

The door lock is released for the time set in the System setting on a PC.

*If the set release time is “0”, it can be released while the button is pressed and held.

CAUTION:

Be sure to confirm the visitor securely before releasing the door if the sub station has no camera.

NOTES:

•To enable door release to a door station in a remote site, the appropriate setting must be made at the remote site.

•This function is disabled during scan-monitoring. ( → P. 36)

Using the PRIVACY function

The PRIVACY function of a master station prevents you from being heard by other master stations (in your site) or remote sites that call you.

To activate the PRIVACY function

Set the PRIVACY MODE to “1” or “2” in the "INITIAL SETTING". If you will not use the PRIVACY MODE, set it to “OFF”. (→P. 20)

■While receiving a call

•When the PRIVACY function is activated

The microphone of your master station is muted, so the sounds at your side are not heard by the caller.

•When the PRIVACY function is off

The microphone of your master station is enabled, so the sounds at your side are heard by the caller.

■To communicate with the caller

•When the PRIVACY function is activated

Press TALK or lift the handset, and the microphone is enabled. Then you can communicate with the caller.

•When the PRIVACY function is off

You can communicate with the caller without pressing TALK or lifting the handset.

*To mute the microphone temporarily:

Press and hold PRIVACY , and the microphone is muted. Release PRIVACY to enable the microphone.

The status of master station depending on the

PRIVACY MODE

PRIVACY

LED When receiving a call from another When communicating

MODE

master station or remote site

with a sub station

 

•

The microphone is muted.

•

Microphone is enabled.

 

•

When you press

TALK

 

•

The microphone

1

Lit

or lift the handset

to

 

 

is muted while

 

 

answer the call, the

 

pressing

 

 

microphone is enabled.

 

 

 

 

 

 

PRIVACY

.

 

•

The microphone is muted.

 

 

 

 

 

 

 

 

•

When you receive a call

 

 

 

 

 

from a master station or

 

 

 

 

 

remote site, the caller

 

 

 

 

 

and you are notified by a

 

 

 

2Lit tone that you are in the PRIVACY MODE. When you press TALK or lift the handset to answer

the call, the microphone is enabled.

•The microphone is

 

 

enabled. Communication

 

 

starts when a direct voice

 

 

call arrives from a master

OFF

Off

station in your site or

remote site.

 

 

•The microphone is muted while pressing

PRIVACY .

NOTE:

When "COMMUNICATION METHOD" is set to "PTT" (press-to-talk mode) in the "INITIAL SETTING", you do not have to activate the PRIVACY function.

GETTING STARTED SETTING AND ADJUSTMENT USING THE SYSTEM

APPENDIX

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents 834174 B P0811JZ Standard IP SystemContents Viewing video images at Target station Paging Chime paging Calling another station Direct voice call MonitoringPrecautions General PrecautionsIntroduction Unit becomes inoperative during power failure Color monitor master station Part NamesDisplay item examples MonitorDisplay examples Standby modeVandal-resistant audio door station flush-mount IS-SS Vandal-resistant door stationTransmit LED red Room sub station IS-RSIS-CCU Outline of OperationsCommunication You cannot monitor or scan-monitor a remote site Electric door strike Door station Room sub station Setting items Master Station Settings and AdjustmentsAdjusting sound volume Tone VOL Adjusting screen brightness BrightnessRoom SUB Call Tone Initial settings Initial SettingBasic setting procedure Setting the call-in tones Door Call ToneSub items are displayed Setting the display modes of the monitor DisplayYou can make the following settings for the display modes Press to select the desired search item so thatTransfer Delay Call TransferSchedule Transfer Privacy Mode Telephone TransferPRIVACY-2 Call Tone Receiving a call Call tone rings, and the corresponding display appearsLights up Answer the call in one of the following ways Communication in the hands-free modeCommunication in the press-to-talk mode When called in from a sub stationPress-to-talk mode Communication by using the handsetWhen two or more calls have arrived IS-MV Hands-free modeWide Zoom Switching Zoom/WideViewing video images at a video door station Pan & TiltPress Adjust again Adjusting imagesPress Adjust when the image is difficult to see To restore the image before adjustmentWhen both 1 and 3 are set, 3 takes priority Communication transferringCall transferring To communicate with the caller While receiving a callName Search →P Received Calls →P Standby modeSearch items Stations by Area →P Placed Calls →PRemote Site →P Search ListName Search →P Stations by Area →P Stations by Type →P Paging Zone →P Chime Zone →PYou cannot select two or more remote sites When searching for MASTER004 Press the dial keys as followsSearching for a station, zone or remote site from the list PressAll the station types are displayed in the list Select Stations by Type from the Search LIST. →PAll the stations in the area are displayed in the list You can select up to 5 stations. →PRemote Site You can select up to 5 stations and/or zones. →P Placed CallsPress to select Placed Calls in the standby mode. →P Press to select Received Calls in the standby mode. →PPage Press OFF or hang up the handset to finish communicating Calling another station direct voice callTo shift to scan-monitoring Viewing video images at the target stationMonitoring Scan-monitoringMaking chime paging automatically Communicating with telephone North America only Other FunctionsIt is also possible to set to stop the current chime paging Other functions combined with connected external devicesRoom sub station Central control unitAvailable Character List Technical PrecautionsSpecifications Vandal-resistant audio door station flash-mount IS-SS Vandal-resistant video door station surface-mount IS-DVVandal-resistant video door station flush-mount IS-DVF IP vandal-resistant video door station flush-mount IS-IPDVFPower supply unit IS-PU-UL, IS-PU-S Warranty For US marketObject area of is the EU For Canada market
Related manuals
Manual 28 pages 11.84 Kb
Top Page Image Contents