Aiphone IS operation manual Paging, You cannot monitor or scan-monitor a remote site

Page 13

Paging

On a master station, you can initiate paging or chime paging to the selected zone(s). All the stations previously registered to the zone(s) receive the paging or chime. (→P. 37)

*You can also call another master station or a sub station in your site individually by direct voice call. The receiver can reply in the hands-free mode.

*You can also make paging or chime paging to the registered external speaker(s).

*You can also make paging to the pilot zone in a remote site, or chime paging to the pilot zone in a remote site when the site has chime sources. (The chime paging does not commence when the site does not have a central control unit.)

Room sub stations

Master station

Paging or chime paging

Master stations

Door stations

GETTING STARTED SETTING AND

 

 

Target

 

Operation

 

 

 

In your site

In a remote site

In a remote site

 

(standard (IP) system)

(standard (IP) system)

(network direct system)

Paging

 

 

 

 

Chime paging

 

 

 

 

Scheduled chime paging (automatic)

 

 

 

 

: Possible :Impossible

 

 

 

Monitoring

On a master station, you can monitor a sub station in your site.

You can also initiate the scan-monitoring (monitoring multiple preset stations sequentially). For an audio door station or room sub station, you can monitor sounds only.

(→P. 36)

*You cannot monitor or scan-monitor a remote site.

Master station

 

Door station (video)

Door station (audio)

Room sub station

 

Monitoring

or

or

 

 

 

 

 

 

Target

 

Operation

 

 

 

In your site

In a remote site

In a remote site

 

(standard (IP) system)

(standard (IP) system)

(network direct system)

Monitoring

 

 

 

 

Scan-monitoring

 

 

 

 

: Possible :Impossible

ADJUSTMENT USING THE SYSTEM

APPENDIX

13

Image 13
Contents 834174 B P0811JZ Standard IP SystemContents Viewing video images at Target station Paging Chime paging Calling another station Direct voice call MonitoringGeneral Precautions PrecautionsIntroduction Unit becomes inoperative during power failure Color monitor master station Part NamesDisplay item examples MonitorDisplay examples Standby modeVandal-resistant audio door station flush-mount IS-SS Vandal-resistant door stationTransmit LED red Room sub station IS-RSIS-CCU Outline of OperationsCommunication You cannot monitor or scan-monitor a remote site Electric door strike Door station Room sub station Setting items Master Station Settings and AdjustmentsAdjusting sound volume Tone VOL Adjusting screen brightness BrightnessBasic setting procedure Initial settings Initial SettingSetting the call-in tones Door Call Tone Room SUB Call ToneYou can make the following settings for the display modes Setting the display modes of the monitor DisplayPress to select the desired search item so that Sub items are displayedCall Transfer Transfer DelaySchedule Transfer Telephone Transfer Privacy ModePRIVACY-2 Call Tone Call tone rings, and the corresponding display appears Receiving a callLights up Communication in the press-to-talk mode Communication in the hands-free modeWhen called in from a sub station Answer the call in one of the following waysWhen two or more calls have arrived IS-MV Communication by using the handsetHands-free mode Press-to-talk modeViewing video images at a video door station Switching Zoom/WidePan & Tilt Wide ZoomPress Adjust when the image is difficult to see Adjusting imagesTo restore the image before adjustment Press Adjust againCommunication transferring When both 1 and 3 are set, 3 takes priorityCall transferring To communicate with the caller While receiving a callSearch items Standby modeStations by Area →P Placed Calls →P Name Search →P Received Calls →PName Search →P Stations by Area →P Stations by Type →P Search ListPaging Zone →P Chime Zone →P Remote Site →PSearching for a station, zone or remote site from the list When searching for MASTER004 Press the dial keys as followsPress You cannot select two or more remote sitesAll the stations in the area are displayed in the list Select Stations by Type from the Search LIST. →PYou can select up to 5 stations. →P All the station types are displayed in the listRemote Site Press to select Placed Calls in the standby mode. →P Placed CallsPress to select Received Calls in the standby mode. →P You can select up to 5 stations and/or zones. →PPage Press OFF or hang up the handset to finish communicating Calling another station direct voice callMonitoring Viewing video images at the target stationScan-monitoring To shift to scan-monitoringMaking chime paging automatically Communicating with telephone North America only Other FunctionsRoom sub station Other functions combined with connected external devicesCentral control unit It is also possible to set to stop the current chime pagingAvailable Character List Technical PrecautionsSpecifications Vandal-resistant video door station flush-mount IS-DVF Vandal-resistant video door station surface-mount IS-DVIP vandal-resistant video door station flush-mount IS-IPDVF Vandal-resistant audio door station flash-mount IS-SSPower supply unit IS-PU-UL, IS-PU-S For US market WarrantyObject area of is the EU For Canada market
Related manuals
Manual 28 pages 11.84 Kb