Aiphone IS Adjusting screen brightness Brightness, Adjusting sound volume Tone VOL

Page 16

Setting the display language

When the master station is started up for the ﬁrst time, the [DISPLAY LANGUAGE] setting screen appears on the monitor. The display language for the monitor screen is set to English as default. First change it to the language you need as follows.

IS-IPMV

1 Press repeatedly to select the target language (so that it is highlighted).

2 Press ZOOM/WIDE to decide on the selected one.

ZOOM/WIDE

NOTE:

If the [DISPLAY LANGUAGE] setting screen does not appear, press SETTING , then select [INITIAL SETTING] → [DISPLAY] →

[DISPLAY LANGUAGE], and then select the target language. (→ P. 17-18).

Adjusting screen brightness [BRIGHTNESS]

You can adjust the brightness of the monitor in 10 levels.

*This adjustment can also be made while receiving a call, communicating or monitoring (when [SETTING] is displayed on the monitor).

1 Press SETTING in the standby mode.

The setting screen appears.

2	Press	(Pan & Tilt control button) repeatedly to
	select [BRIGHTNESS] (so that it is highlighted).

3 Press repeatedly to change the level.

*You can see the change of brightness as you change the value.

Adjusting sound volume [TONE VOL],

[RECEIVE VOL]

You can adjust the sound volume of call tone [TONE VOL] and receiving tone [RECEIVE VOL] respectively. The adjusting range is off and 1 to10.

*This adjustment can also be made while receiving a call, communicating or monitoring (when [SETTING] is displayed on the monitor).

1 Press SETTING in the standby mode.

The setting screen appears.

2 Press repeatedly to select [TONE VOL] or [RECEIVE VOL] you wish to adjust (so that it is highlighted).

3 Press repeatedly to change the level.

*The call tone sounds in the selected level.

*If you change the level when communicating, you can check the receiving sound volume of the selected level as it's changed.

*This icon is displayed when the volume is set to off.

16

Image 16

Contents Standard IP System 834174 B P0811JZContents Calling another station Direct voice call Monitoring Viewing video images at Target station Paging Chime pagingGeneral Precautions PrecautionsIntroduction Unit becomes inoperative during power failure Part Names Color monitor master stationMonitor Display item examplesStandby mode Display examplesVandal-resistant door station Vandal-resistant audio door station ﬂush-mount IS-SSRoom sub station IS-RS Transmit LED redOutline of Operations IS-CCUCommunication You cannot monitor or scan-monitor a remote site Electric door strike Door station Room sub station Master Station Settings and Adjustments Setting itemsAdjusting screen brightness Brightness Adjusting sound volume Tone VOLInitial settings Initial Setting Basic setting procedureSetting the call-in tones Door Call Tone Room SUB Call ToneSetting the display modes of the monitor Display You can make the following settings for the display modesPress to select the desired search item so that Sub items are displayedCall Transfer Transfer DelaySchedule Transfer Telephone Transfer Privacy ModePRIVACY-2 Call Tone Call tone rings, and the corresponding display appears Receiving a callLights up Communication in the hands-free mode Communication in the press-to-talk modeWhen called in from a sub station Answer the call in one of the following waysCommunication by using the handset When two or more calls have arrived IS-MVHands-free mode Press-to-talk modeSwitching Zoom/Wide Viewing video images at a video door stationPan & Tilt Wide ZoomAdjusting images Press Adjust when the image is difﬁcult to seeTo restore the image before adjustment Press Adjust againCommunication transferring When both 1 and 3 are set, 3 takes priorityCall transferring While receiving a call To communicate with the callerStandby mode Search itemsStations by Area →P Placed Calls →P Name Search →P Received Calls →PSearch List Name Search →P Stations by Area →P Stations by Type →PPaging Zone →P Chime Zone →P Remote Site →PWhen searching for MASTER004 Press the dial keys as follows Searching for a station, zone or remote site from the listPress You cannot select two or more remote sitesSelect Stations by Type from the Search LIST. →P All the stations in the area are displayed in the listYou can select up to 5 stations. →P All the station types are displayed in the listRemote Site Placed Calls Press to select Placed Calls in the standby mode. →PPress to select Received Calls in the standby mode. →P You can select up to 5 stations and/or zones. →PPage Calling another station direct voice call Press OFF or hang up the handset to ﬁnish communicatingViewing video images at the target station MonitoringScan-monitoring To shift to scan-monitoringMaking chime paging automatically Other Functions Communicating with telephone North America onlyOther functions combined with connected external devices Room sub stationCentral control unit It is also possible to set to stop the current chime pagingTechnical Precautions Available Character ListSpecifications Vandal-resistant video door station surface-mount IS-DV Vandal-resistant video door station ﬂush-mount IS-DVFIP vandal-resistant video door station ﬂush-mount IS-IPDVF Vandal-resistant audio door station ﬂash-mount IS-SSPower supply unit IS-PU-UL, IS-PU-S For US market WarrantyObject area of is the EU For Canada market

Related manuals

Manual 28 pages 11.84 Kb