Aiphone IS operation manual Monitor, Display item examples

Page 7

■Monitor

Display item examples

List of stations, zones and/or remote sites (→P. 30)

The list of the stations, zones and/or remote sites you searched for is shown here. Stations, zones and/or remote sites are displayed either by number and/ or name depending on the setting on the "INITIAL SETTING".

*“NOT AVAILABLE” appears in the list when a corresponding station, zone or remote site is not detected.

List page no. (→P. 17)

When the list of stations, zones and/or remote sites, or setting items consists of two or more pages, the current page no. is shown here.

Information display (→"USING THE SYSTEM")

Displays the name (or number) of selected or calling station, operation method, etc.

Function buttons

The function buttons are also enabled when the function indicators just above the buttons are displayed.

*The function name on an indicator may differ from the name of the corresponding button. In that case, the button operates as the function of the indicator.

Function indicators

The indicators differ depending on the display mode.

* These are not touch panel keys.

NOTE:

The above display example differs from the actual one.

Status display icons

The following icons are displayed here depending on the status of the master station.

*The color of an icon changes according to the priority level. Normal: green

Priority: yellow

Urgent: red

Icons

The status when the icon appears

 

 

 

Appears while talking to the target station, being called

 

from another master station, etc.

 

Appears while being called.

Appears while being called from two or more sub stations. (For example, “002” on the figure shows that 2 calls are coming in at the same time.)

* There is a case that “001” appears on the icon when being called from a station while talking to another.

*This icon will not be displayed on an IP master station (IS-IPMV).

Appears when paging.

Appears when the image on the monitor is adjusted by pressing the ADJUST button.

Appears while the door release is activated by pressing the door release button.

Appears when the microphone volume is set to OFF, or the PRIVACY function is activated.

Appears while transferring is suspended.

Appears while receiving a call from a station transferred by another one.

*This icon also appears on the station that performs transferring.

Appears while searching for a station, zone or remote site.

Appears while monitoring.

Appears during scan-monitoring.

Appears when an error message is displayed.

Appears when a setting screen is displayed.

Appears while performing chime paging.

Appears when the microphone volume is set to ON.

Shows it is a waiting time for shifting to the next performance, etc.

GETTING STARTED SETTING AND ADJUSTMENT USING THE SYSTEM

APPENDIX

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents 834174 B P0811JZ Standard IP SystemContents Viewing video images at Target station Paging Chime paging Calling another station Direct voice call MonitoringGeneral Precautions PrecautionsIntroduction Unit becomes inoperative during power failure Color monitor master station Part NamesDisplay item examples MonitorDisplay examples Standby modeVandal-resistant audio door station flush-mount IS-SS Vandal-resistant door stationTransmit LED red Room sub station IS-RSIS-CCU Outline of OperationsCommunication You cannot monitor or scan-monitor a remote site Electric door strike Door station Room sub station Setting items Master Station Settings and AdjustmentsAdjusting sound volume Tone VOL Adjusting screen brightness BrightnessRoom SUB Call Tone Initial settings Initial SettingBasic setting procedure Setting the call-in tones Door Call ToneSub items are displayed Setting the display modes of the monitor DisplayYou can make the following settings for the display modes Press to select the desired search item so thatCall Transfer Transfer DelaySchedule Transfer Telephone Transfer Privacy ModePRIVACY-2 Call Tone Call tone rings, and the corresponding display appears Receiving a callLights up Answer the call in one of the following ways Communication in the hands-free modeCommunication in the press-to-talk mode When called in from a sub stationPress-to-talk mode Communication by using the handsetWhen two or more calls have arrived IS-MV Hands-free modeWide Zoom Switching Zoom/WideViewing video images at a video door station Pan & TiltPress Adjust again Adjusting imagesPress Adjust when the image is difficult to see To restore the image before adjustmentCommunication transferring When both 1 and 3 are set, 3 takes priorityCall transferring To communicate with the caller While receiving a callName Search →P Received Calls →P Standby modeSearch items Stations by Area →P Placed Calls →PRemote Site →P Search ListName Search →P Stations by Area →P Stations by Type →P Paging Zone →P Chime Zone →PYou cannot select two or more remote sites When searching for MASTER004 Press the dial keys as followsSearching for a station, zone or remote site from the list PressAll the station types are displayed in the list Select Stations by Type from the Search LIST. →PAll the stations in the area are displayed in the list You can select up to 5 stations. →PRemote Site You can select up to 5 stations and/or zones. →P Placed CallsPress to select Placed Calls in the standby mode. →P Press to select Received Calls in the standby mode. →PPage Press OFF or hang up the handset to finish communicating Calling another station direct voice callTo shift to scan-monitoring Viewing video images at the target stationMonitoring Scan-monitoringMaking chime paging automatically Communicating with telephone North America only Other FunctionsIt is also possible to set to stop the current chime paging Other functions combined with connected external devicesRoom sub station Central control unitAvailable Character List Technical PrecautionsSpecifications Vandal-resistant audio door station flash-mount IS-SS Vandal-resistant video door station surface-mount IS-DVVandal-resistant video door station flush-mount IS-DVF IP vandal-resistant video door station flush-mount IS-IPDVFPower supply unit IS-PU-UL, IS-PU-S For US market WarrantyObject area of is the EU For Canada market
Related manuals
Manual 28 pages 11.84 Kb
Top Page Image Contents