Aiphone Vandal-resistant door station, Vandal-resistant audio door station flush-mount IS-SS

Page 9

Vandal-resistant door station

Vandal-resistant video door station (IS-DV)

IP vandal-resistant video door station (IS-IPDV) (surface-mount)

White light LED

Lights up automatically when a call operation is made on this unit at night.

Name plate (with backlight)

Write down a name on the plate. The backlight is always lit while the power is on to make a visitor confirm the name even at night.

Vandal-resistant video door station (IS-DVF)

IP vandal-resistant video door station (IS-IPDVF) (flush-mount)

Camera (→P. 24)

Captures images to display on the monitor of the master station.

Microphone

Sends sounds from the door station to the master station.

Speaker

Outputs sounds from the master station.

Status LED (red/orange/green)

Indicates the current status (calling, talking, etc.) of this station by color.

e.g.) Lights up in orange in the standby mode.

Call button (→P. 21)

Calls the preset master stations.

Water escape holes

These are for discharging rain water inside the unit.

Do not obstruct these holes.

GETTING STARTED SETTING AND

Camera

Microphone

White light LED

Speaker

Name plate (with backlight)

Call button

Status LED (red/orange/green)

Vandal-resistant audio door station (flush-mount) (IS-SS)

Microphone

Speaker

Call button

ADJUSTMENT USING THE SYSTEM

APPENDIX

9

Image 9
Contents 834174 B P0811JZ Standard IP SystemContents Viewing video images at Target station Paging Chime paging Calling another station Direct voice call MonitoringPrecautions General PrecautionsIntroduction Unit becomes inoperative during power failure Color monitor master station Part NamesDisplay item examples MonitorDisplay examples Standby modeVandal-resistant audio door station flush-mount IS-SS Vandal-resistant door stationTransmit LED red Room sub station IS-RSIS-CCU Outline of OperationsCommunication You cannot monitor or scan-monitor a remote site Electric door strike Door station Room sub station Setting items Master Station Settings and AdjustmentsAdjusting sound volume Tone VOL Adjusting screen brightness BrightnessBasic setting procedure Initial settings Initial SettingSetting the call-in tones Door Call Tone Room SUB Call ToneYou can make the following settings for the display modes Setting the display modes of the monitor DisplayPress to select the desired search item so that Sub items are displayedTransfer Delay Call TransferSchedule Transfer Privacy Mode Telephone TransferPRIVACY-2 Call Tone Receiving a call Call tone rings, and the corresponding display appearsLights up Communication in the press-to-talk mode Communication in the hands-free modeWhen called in from a sub station Answer the call in one of the following waysWhen two or more calls have arrived IS-MV Communication by using the handsetHands-free mode Press-to-talk modeViewing video images at a video door station Switching Zoom/WidePan & Tilt Wide ZoomPress Adjust when the image is difficult to see Adjusting imagesTo restore the image before adjustment Press Adjust againWhen both 1 and 3 are set, 3 takes priority Communication transferringCall transferring To communicate with the caller While receiving a callSearch items Standby modeStations by Area →P Placed Calls →P Name Search →P Received Calls →PName Search →P Stations by Area →P Stations by Type →P Search ListPaging Zone →P Chime Zone →P Remote Site →PSearching for a station, zone or remote site from the list When searching for MASTER004 Press the dial keys as followsPress You cannot select two or more remote sitesAll the stations in the area are displayed in the list Select Stations by Type from the Search LIST. →PYou can select up to 5 stations. →P All the station types are displayed in the listRemote Site Press to select Placed Calls in the standby mode. →P Placed CallsPress to select Received Calls in the standby mode. →P You can select up to 5 stations and/or zones. →PPage Press OFF or hang up the handset to finish communicating Calling another station direct voice callMonitoring Viewing video images at the target stationScan-monitoring To shift to scan-monitoringMaking chime paging automatically Communicating with telephone North America only Other FunctionsRoom sub station Other functions combined with connected external devicesCentral control unit It is also possible to set to stop the current chime pagingAvailable Character List Technical PrecautionsSpecifications Vandal-resistant video door station flush-mount IS-DVF Vandal-resistant video door station surface-mount IS-DVIP vandal-resistant video door station flush-mount IS-IPDVF Vandal-resistant audio door station flash-mount IS-SSPower supply unit IS-PU-UL, IS-PU-S Warranty For US marketObject area of is the EU For Canada market
Related manuals
Manual 28 pages 11.84 Kb