Aiphone IS operation manual Display examples, Standby mode

Page 8

Display examples

[Standby mode]

*The monitor with no display (black) may also be in the standby mode.

Date, time, station no. and name of this master station

Key map for selecting the search items

[When talking with a door station]

Station no. and name (or remote site no. and name) of the target station or calling station

If the target station or calling station is a video door station, the video image at the station is displayed.

[When called from a room sub station]

Station no. and name (or remote site no. and name) of the calling station

The calling station type image (or remote site symbol image)

If the target station or calling station is an audio door station, room sub station or master station, no video image is displayed.

Displaying call and/or (chime) paging record and reception record

Call and/or (chime) paging record and reception record can be displayed on the monitor for each up to 20 items.

*When no answer was returned to an incoming call from this master station, it is displayed in the reception record list.

In the records, unanswered incoming calls are marked with (outlined in yellow) or .

: Unanswered calls that have not been confirmed on the list yet

: Unanswered calls that have already been confirmed on the list

NOTES:

The calls that are not received at the master station are not recorded. (An IS-IPMV cannot receive two or more calls at a time.)

The record of unanswered incoming calls can also be automatically displayed by the setting on the “INITIAL SETTING”. ( P. 18)

The reception of chime is not recorded.

A monitoring operation is not recorded. If monitoring is shifted to talking, it will be recorded.

8

Image 8
Contents Standard IP System 834174 B P0811JZContents Calling another station Direct voice call Monitoring Viewing video images at Target station Paging Chime pagingIntroduction PrecautionsGeneral Precautions Unit becomes inoperative during power failure Part Names Color monitor master stationMonitor Display item examplesStandby mode Display examplesVandal-resistant door station Vandal-resistant audio door station flush-mount IS-SSRoom sub station IS-RS Transmit LED redOutline of Operations IS-CCUCommunication You cannot monitor or scan-monitor a remote site Electric door strike Door station Room sub station Master Station Settings and Adjustments Setting itemsAdjusting screen brightness Brightness Adjusting sound volume Tone VOLInitial settings Initial Setting Basic setting procedureSetting the call-in tones Door Call Tone Room SUB Call ToneSetting the display modes of the monitor Display You can make the following settings for the display modesPress to select the desired search item so that Sub items are displayedSchedule Transfer Transfer DelayCall Transfer PRIVACY-2 Call Tone Privacy ModeTelephone Transfer Lights up Receiving a callCall tone rings, and the corresponding display appears Communication in the hands-free mode Communication in the press-to-talk modeWhen called in from a sub station Answer the call in one of the following waysCommunication by using the handset When two or more calls have arrived IS-MVHands-free mode Press-to-talk modeSwitching Zoom/Wide Viewing video images at a video door stationPan & Tilt Wide ZoomAdjusting images Press Adjust when the image is difficult to seeTo restore the image before adjustment Press Adjust againCall transferring When both 1 and 3 are set, 3 takes priorityCommunication transferring While receiving a call To communicate with the callerStandby mode Search itemsStations by Area →P Placed Calls →P Name Search →P Received Calls →PSearch List Name Search →P Stations by Area →P Stations by Type →PPaging Zone →P Chime Zone →P Remote Site →PWhen searching for MASTER004 Press the dial keys as follows Searching for a station, zone or remote site from the listPress You cannot select two or more remote sitesSelect Stations by Type from the Search LIST. →P All the stations in the area are displayed in the listYou can select up to 5 stations. →P All the station types are displayed in the listRemote Site Placed Calls Press to select Placed Calls in the standby mode. →PPress to select Received Calls in the standby mode. →P You can select up to 5 stations and/or zones. →PPage Calling another station direct voice call Press OFF or hang up the handset to finish communicatingViewing video images at the target station MonitoringScan-monitoring To shift to scan-monitoringMaking chime paging automatically Other Functions Communicating with telephone North America onlyOther functions combined with connected external devices Room sub stationCentral control unit It is also possible to set to stop the current chime pagingTechnical Precautions Available Character ListSpecifications Vandal-resistant video door station surface-mount IS-DV Vandal-resistant video door station flush-mount IS-DVFIP vandal-resistant video door station flush-mount IS-IPDVF Vandal-resistant audio door station flash-mount IS-SSPower supply unit IS-PU-UL, IS-PU-S Object area of is the EU WarrantyFor US market For Canada market
Related manuals
Manual 28 pages 11.84 Kb