Aiphone IS operation manual Unit becomes inoperative during power failure

Page 5

10.The unit becomes inoperative during power failure.

11.In areas where broadcasting station antennas are close by, the intercom system may be affected by radio frequency interference.

12.All the units, except for door station, is designed for indoor use only. Do not use outdoors.

13.This product, being a control unit of door release, should not be used as a crime prevention device.

14.It must be noted in advance that the LCD panel, though manufactured with very high precision techniques, inevitably will have a very small portion of its picture elements always lit or not lit at all. This is not considered a unit malfunction.

15.Door station is weather-resistant, but do not spray high-pressure water. Unit trouble could result.

16.Due to the environmental sound around the unit, it may hinder smooth communication, but this is not a malfunction.

17.Refrain from using the color monitor station in sunlit areas.

18.At night, due to reduced lighting on the object, the monitor sees more noise and the face becomes more difficult to see, but this is not malfunction.

19.For the hands-free communication:

If you stand too far away, it may be difficult for the other person to hear the communication.

20.If there are loud noises around the unit (such as music playing or children crying), the sound may break up and be difficult to hear.

21.During communication, if you speak before the other person has finished talking, your voice may not come through clearly. Communication will proceed smoothly if you wait until the other person has finished before speaking.

22.At a gate or porch illuminated by a fluorescent lamp, the picture may vary, but this is not a malfunction.

23.The outline of video images displayed by video door station may differ from that of the actual person(s) or background, but this is not a malfunction.

24.If the screen of a video door station freezes during wintertime, the picture may become difficult to see or the call button (including the call button of audio door station) may not move, but this is not a malfunction.

25.Aiphone assumes no responsibility for corruption of saved information (such as changes to or deletion of saved information). Please be aware of this in advance.

26.Warm-color lighting shining on the video door station may change the tint of the picture on the monitor.

27.When outside temperature lowers sharply after rainfall, etc., the inside of the camera may fog up slightly, causing a blurry picture, but this is not a malfunction. Normal operation will be restored when moisture evaporates.

28.When talking continuously, the talking may be interrupted by the noise cut function because the continuous talk is regarded as a noise, but this is not a malfunction.

29.During monitoring, the noise cut function does not work for making outside sounds easy to hear, so the noise may be heard louder than during communication.

30.When the unit's screen is illuminated with strong light, the image looks white or silhouetted. But this is not a unit trouble.

Notes on using this system

Depending on the network environment and computer, it may not be useable.

You need to set the ID/password to access the web server when changing the system settings or doing the system maintenance. The system administrator must keep the ID/password without fail. If you forget the ID/password, you must initialize the unit, thus all the setting contents return to default.

The ID/Password to access the web server for setting the system is the customer's responsibility. Make sure you set a password that cannot be easily guessed by a third party. We recommend that you change the ID/Password on a regular basis.

You may not be able to operate stations while updating the System settings by using a PC.

If communications are congested or multiple video door stations are used for call or communication within the system, the frame rate may be degraded or communications may be interrupted.

You can also refer to our web site at http://www.aiphone.net/ for some parts of the instructions for this system.

If you are experiencing difficulties in the use of the system, please check our web site at http://www.aiphone.net/.

Notices

We will under no conditions be liable for damage that occurs due to failures in network equipment; failures due to internet providers and cell phone companies; failures such as disconnected lines and other losses in communication, which render it impossible to provide this service or in any way delay this service due to causes outside of our responsibility; or if an error or missing data occurs during transmission.

We will under no conditions be liable for damage caused if a customer's password or transmitted information are leaked through bugging or unlawful computer access over Internet communication.

We will under no conditions be liable for damage that occurs due to the inability to communicate due to malfunctions, problems, or operational errors in this product.

We will under no conditions be liable for any damages or losses resulting from this product's contents or specifications.

This manual was created by Aiphone Co., Ltd., all rights reserved. Copying a part of or this entire manual without prior permission from Aiphone Co., Ltd. is strictly forbidden.

Please note that images and illustrations depicted in this manual may differ from the actual ones.

Please note that this manual may be revised or changed without prior notice.

Please note that product specifications may be changed for the sake of improvement without prior notice.

Please be aware that it is the customer's responsibility to ensure that their computer is secure. We will under no conditions be liable for security failures.

This system is not intended for life support or crime prevention. It is just a supplementary means of conveying information. Aiphone will under no conditions be liable for loss of life or property which occurs while the system is being operated.

This system is not intended for preventing physical injury, accidents caused by disasters and property damage.

When the web server is rebooted, all the registrations are returned to the settings that were made last time. Please make the settings again.

5

Image 5
Contents 834174 B P0811JZ Standard IP SystemContents Viewing video images at Target station Paging Chime paging Calling another station Direct voice call MonitoringIntroduction PrecautionsGeneral Precautions Unit becomes inoperative during power failure Color monitor master station Part NamesDisplay item examples MonitorDisplay examples Standby modeVandal-resistant audio door station flush-mount IS-SS Vandal-resistant door stationTransmit LED red Room sub station IS-RSIS-CCU Outline of OperationsCommunication You cannot monitor or scan-monitor a remote site Electric door strike Door station Room sub station Setting items Master Station Settings and AdjustmentsAdjusting sound volume Tone VOL Adjusting screen brightness BrightnessBasic setting procedure Initial settings Initial SettingSetting the call-in tones Door Call Tone Room SUB Call ToneYou can make the following settings for the display modes Setting the display modes of the monitor DisplayPress to select the desired search item so that Sub items are displayedSchedule Transfer Transfer DelayCall Transfer PRIVACY-2 Call Tone Privacy ModeTelephone Transfer Lights up Receiving a callCall tone rings, and the corresponding display appears Communication in the press-to-talk mode Communication in the hands-free modeWhen called in from a sub station Answer the call in one of the following waysWhen two or more calls have arrived IS-MV Communication by using the handsetHands-free mode Press-to-talk modeViewing video images at a video door station Switching Zoom/WidePan & Tilt Wide ZoomPress Adjust when the image is difficult to see Adjusting imagesTo restore the image before adjustment Press Adjust againCall transferring When both 1 and 3 are set, 3 takes priorityCommunication transferring To communicate with the caller While receiving a callSearch items Standby modeStations by Area →P Placed Calls →P Name Search →P Received Calls →PName Search →P Stations by Area →P Stations by Type →P Search ListPaging Zone →P Chime Zone →P Remote Site →PSearching for a station, zone or remote site from the list When searching for MASTER004 Press the dial keys as followsPress You cannot select two or more remote sitesAll the stations in the area are displayed in the list Select Stations by Type from the Search LIST. →PYou can select up to 5 stations. →P All the station types are displayed in the listRemote Site Press to select Placed Calls in the standby mode. →P Placed CallsPress to select Received Calls in the standby mode. →P You can select up to 5 stations and/or zones. →PPage Press OFF or hang up the handset to finish communicating Calling another station direct voice callMonitoring Viewing video images at the target stationScan-monitoring To shift to scan-monitoringMaking chime paging automatically Communicating with telephone North America only Other FunctionsRoom sub station Other functions combined with connected external devicesCentral control unit It is also possible to set to stop the current chime pagingAvailable Character List Technical PrecautionsSpecifications Vandal-resistant video door station flush-mount IS-DVF Vandal-resistant video door station surface-mount IS-DVIP vandal-resistant video door station flush-mount IS-IPDVF Vandal-resistant audio door station flash-mount IS-SSPower supply unit IS-PU-UL, IS-PU-S Object area of is the EU WarrantyFor US market For Canada market
Related manuals
Manual 28 pages 11.84 Kb