Part Names, Color monitor master station

GETTING STARTED

PART NAMES

Color monitor master station

Color monitor master station (IS-MV)

Color monitor IP master station (IS-IPMV)

■ Control panel

Status LED (red)

Indicates the current status of the

master station by lighting up or

Handset (→P. 23) Hook switch

Speaker

Color LCD monitor

blinking in red (while initializing

Call tones and communication

See the next page

the system, being called,

communicating, etc.).

sounds are heard from this.

for details.

* This may blink when you do not

answer a call, though it is not a

failure.

Name card and name plate

Write down the names of stations,

zones, remote sites, etc. registered

to the speed dial buttons on

the card and set it under the

transparent name plate.

Speed dial buttons (1 to 6)

(numbered beginning at the top)

(→P. 34)

TRANSFER button <

TRANSFER

and LED (red) (→P. 26)

or remote sites you call or select

Press to transfer a call (or

frequently to each of these buttons.

communication) to another master

You can select a station, zone or

station or a remote site.

remote site simply by pressing the

PRIVACY button <

> and

corresponding button.

PRIVACY

Reset button

LED (red) (→P. 27)

Press to turn on the PRIVACY function.

(under the name card)

Press to reset the master

station.

LIST button <

> (→P. 29)

* Do not touch this button.

Microphone

LIST

Press to display the list of the

Sends sounds from the master

registered stations, zones or

station to other stations.

remote sites.

OFF button <

> (→P. 22)

SETTING button <

> (→P. 16)

OFF

SETTING

Press to ﬁnish communication,

Press to display the setting items.

monitoring or calling.

ADJUST button <

> (→P. 25)

ADJUST

Dial keys (→P. 30)

Adjusts the image on the monitor when it is hard

to see in the daytime or darkness.

Used to enter the number or

name of a station or zone you

ZOOM/WIDE button <

> (→P. 24)

ZOOM/WIDE

want to search for.

Switches the display mode between zoom and

wide.

MONITOR button <

> (→P. 36)

MONITOR

Press to monitor the selected sub station or

(Pan & Tilt control button) (→P. 24)

start scan-monitoring.

Moves the image on the monitor from right

to left or up and down.

TALK button <

TALK

> (→P. 22)

Press to answer a call or call the

selected station.

Door release button <

> (→P. 27)

Transmit LED (red) (→P. 22)

Press to unlock the door connected to

Lights up in red while you are talking to the target station,

the received sub station.

and turns off while you are hearing the sound at the target

station or no communication is made.

* The notation in <

> is used for operational description in this manual.