Transferring to another master station
You can transfer a call received from a sub station to another master station while communicating with it (communication transferring), as well as setting calls to be automatically transferred in the "INITIAL SETTING".
*For a call from another master station, you can transfer it when you are communicating with it. However, you cannot transfer the communication to a remote site.
■Communication transferring
1 Receive a call and communicate with it. (→P. 21) 2 Press TRANSFER .
3 Press 
to select the master station in your site to which you want to transfer the call (so that it is highlighted) from the list.
4 Press TALK or ZOOM/WIDE .
Appears while the transfer is being performed.
or
Blinks in red.
*While transferring, a sound rings at the source station to indicate a transfer.
5 Press OFF to enable the communication between the station that called you and the transfer target station.
NOTE:
You cannot transfer a call from a remote site to another remote site.
■Call transferring
You can transfer a call to the designated master station (in your site or a remote site) or the telephone registered to the system automatically (without answering it) by the "TRANSFER" settings in the "INITIAL SETTING". (→P. 19)
*This function is useful when you are absent or you cannot receive and answer a call.
*When transferring to a remote site, a master station in the remote site should have been registered as the pilot station of the site.
The following settings can be made.
1Transferring a call to the designated master station or remote site automatically (→P. 19 [CALL TRANSFER],
[TRANSFER DESTINA])
2Setting the delay time of triggering transferring after a call is received (→P. 19 [TRANSFER DELAY])
3Setting a schedule for call transferring in the System setting on a PC (→P. 19 [SCHEDULE TRANSFER], [SCHEDULE DESTINA])
4Transferring a call to telephone automatically (→P. 20
[TELEPHONE TRANSFER], [SCHEDULE TEL TRANSFE])
* When both 1 and 3 are set, 3 takes priority.
NOTE:
A call from
26