DSearching for a paging zone in your site from the list [PAGING ZONE]
1Select [PAGING ZONE] from the SEARCH LIST. (→P. 29)
All the registered paging zones are displayed in the list.
2Press 
to select the target zone (so that it is highlighted).
*You can select up to 5 zones. (→P. 30)
3Start paging by following the procedure for paging.
(→P. 37)
ESearching for a chime zone in your site from the list [CHIME ZONE]
1 Select [CHIME ZONE] from the SEARCH LIST. (→P. 29)
All the registered chime zones are displayed in the list.
2 Press 
to select the target zone (so that it is highlighted).
*You can select up to 5 zones. (→P. 30)
3 Start chime paging by following the procedure for chime paging. (→P. 37)
FSearching for a remote site as the target of calling, paging or chime paging from the list
[REMOTE SITE]
1Select [REMOTE SITE] from the SEARCH LIST. (→P. 29)
All the registered remote sites are displayed in the list.
2Press 
to select the target site (so that it is highlighted).
*After this step, you can call the target site with the “Normal” priority by pressing TALK .
For other calling operations such as selecting the priority, refer to P. 35.
3After pressing ZOOM/WIDE , select the performance you want to do from [CALL], [PAGING] and [CHIME] from the list (so that it is highlighted).
4Start calling, paging or chime paging by following the procedure for the corresponding performance (→P. 35, 37).
NOTES:
•Before you perform calling, paging or chime paging to a remote site, confirm what unit(s) in the site will receive and/or respond to your performance.
•You cannot select two or more remote sites.
32