Aiphone IS operation manual Telephone Transfer, Privacy Mode, PRIVACY-2 Call Tone

Page 20

[TELEPHONE TRANSFER]:

Press repeatedly to select ON or OFF, and then press ZOOM/WIDE to decide on the selected one.

*When "ON" is selected, the LED on TRANSFER lights up (red).

[SCHEDULE TEL TRANSFE] (Schedule telephone transfer):

Press repeatedly to select ON or OFF, and then press ZOOM/WIDE to decide on the selected one.

FSetting the PRIVACY function [PRIVACY]

Setting of the PRIVACY function is available when called from another master station.

When the PRIVACY MODE is activated, the microphone turns off and you will not be heard by the caller.

Sub item

Description

Setting range

[PRIVACY MODE]

Sets whether or not to

(PRIVACY MODE) 1:

 

activate the PRIVACY

The microphone is off

 

function. To activate

(mute).

 

the PRIVACY function,

(PRIVACY MODE) 2:

 

select the PRIVACY

The microphone is off

 

MODE 1 or 2.

(mute) and the caller

 

 

and you are notified by

 

 

a tone when you receive

 

 

the call that you are in

 

 

the PRIVACY MODE.

 

 

OFF:

 

 

The microphone is on.

[PRIVACY-2 CALL

(Available when

1-6

TONE]

(PRIVACY MODE) 2 is

 

 

selected.)

 

 

Selects the call tone

 

 

from 6 types.

 

1 Press repeatedly to select [PRIVACY] (so that it is highlighted), and then press ZOOM/WIDE to select.

The sub items are displayed.

*The sub items can also be displayed by pressing PRIVACY in the standby mode.

2 Press repeatedly to select the sub item [PRIVACY MODE] or [PRIVACY-2 CALL TONE] you wish to set (so that it is highlighted), and then press ZOOM/WIDE to decide on the selected one.

3 Make the settings on each sub item as follows.

[PRIVACY MODE]:

Press repeatedly to select the desired mode (so that it is highlighted), and then press ZOOM/WIDE to decide on the selected one.

*When (PRIVACY MODE) 1 or (PRIVACY MODE) 2 is selected, the LED on PRIVACY lights up (red).

[PRIVACY-2 CALL TONE]:

*This setting is available only when [PRIVACY MODE] is set to (PRIVACY MODE) 2.

Press repeatedly to select the desired call tone, and then press ZOOM/WIDE to decide on the selected one.

*You can check the selected tone by hearing it whenever selected.

GInitializing the set contents [INITIALIZATION]

You can reset all the set contents to default.

1Press repeatedly to select [INITIALIZATION] (so that it is highlighted), and then press ZOOM/WIDE to select.

“RETURN TO DEFAULT ?” is displayed.

2 Press ZOOM/WIDE to continue the initialization procedure.

3 Press repeatedly to select [YES] (so that it is highlighted) to perform initializing, and then press ZOOM/WIDE to select.

*Select [NO] if you will cancel initialization.

NOTE:

If you have repositioned the master station, initialize it to clear the speed dial settings etc., and make the settings again.

20

Page 19 Page 21
Image 20
Page 19 Page 21
Contents Standard IP System 834174 B P0811JZContents Calling another station Direct voice call Monitoring Viewing video images at Target station Paging Chime pagingIntroduction PrecautionsGeneral Precautions Unit becomes inoperative during power failure Part Names Color monitor master stationMonitor Display item examplesStandby mode Display examplesVandal-resistant door station Vandal-resistant audio door station flush-mount IS-SSRoom sub station IS-RS Transmit LED redOutline of Operations IS-CCUCommunication You cannot monitor or scan-monitor a remote site Electric door strike Door station Room sub station Master Station Settings and Adjustments Setting itemsAdjusting screen brightness Brightness Adjusting sound volume Tone VOLInitial settings Initial Setting Basic setting procedureSetting the call-in tones Door Call Tone Room SUB Call ToneSetting the display modes of the monitor Display You can make the following settings for the display modesPress to select the desired search item so that Sub items are displayedSchedule Transfer Transfer DelayCall Transfer PRIVACY-2 Call Tone Privacy ModeTelephone Transfer Lights up Receiving a callCall tone rings, and the corresponding display appears Communication in the hands-free mode Communication in the press-to-talk modeWhen called in from a sub station Answer the call in one of the following waysCommunication by using the handset When two or more calls have arrived IS-MVHands-free mode Press-to-talk modeSwitching Zoom/Wide Viewing video images at a video door stationPan & Tilt Wide ZoomAdjusting images Press Adjust when the image is difficult to seeTo restore the image before adjustment Press Adjust againCall transferring When both 1 and 3 are set, 3 takes priorityCommunication transferring While receiving a call To communicate with the callerStandby mode Search itemsStations by Area →P Placed Calls →P Name Search →P Received Calls →PSearch List Name Search →P Stations by Area →P Stations by Type →PPaging Zone →P Chime Zone →P Remote Site →PWhen searching for MASTER004 Press the dial keys as follows Searching for a station, zone or remote site from the listPress You cannot select two or more remote sitesSelect Stations by Type from the Search LIST. →P All the stations in the area are displayed in the listYou can select up to 5 stations. →P All the station types are displayed in the listRemote Site Placed Calls Press to select Placed Calls in the standby mode. →PPress to select Received Calls in the standby mode. →P You can select up to 5 stations and/or zones. →PPage Calling another station direct voice call Press OFF or hang up the handset to finish communicatingViewing video images at the target station MonitoringScan-monitoring To shift to scan-monitoringMaking chime paging automatically Other Functions Communicating with telephone North America onlyOther functions combined with connected external devices Room sub stationCentral control unit It is also possible to set to stop the current chime pagingTechnical Precautions Available Character ListSpecifications Vandal-resistant video door station surface-mount IS-DV Vandal-resistant video door station flush-mount IS-DVFIP vandal-resistant video door station flush-mount IS-IPDVF Vandal-resistant audio door station flash-mount IS-SSPower supply unit IS-PU-UL, IS-PU-S Object area of is the EU WarrantyFor US market For Canada market
Related manuals
Manual 28 pages 11.84 Kb
Top Page Image Contents