Panasonic KX-TG5230C Tone, Programmable Settings Dialing Mode Handset, Line Mode Handset

Programmable Settings

Dialing Mode Handset

If you have touch tone service, set the dialing mode to “Tone”. For rotary or pulse service, set to “Pulse”. The factory preset is “Tone”.

1Press [MENU].

2	Scroll to “Initial setting” by pressing
								Initial setting
	[d] or [B], then press the soft key (						).
						SELECT
3	Scroll to “Set tel line” by pressing [d] or
								Set tel line
	[B], then press the soft key (				).
				SELECT
4	Press the soft key (		) at “Set dial
		SELECT						Set dial mode
	mode”.
5	Select “Pulse” or “Tone” by pressing [d] or
								Set dial mode
	[B].							:Tone

6Press the soft key ( SAVE ), then press [OFF].

Line Mode Handset

The line mode is preset to “B” and generally should not be adjusted. If “ IN USE ” is not displayed on the handset properly, the line mode selection is incorrect. Set line mode to “A”.

1Press [MENU].

2	Scroll to “Initial setting” by pressing
								Initial setting
	[d] or [B], then press the soft key (						).
					SELECT
3	Scroll to “Set tel line” by pressing [d] or
								Set tel line
	[B], then press the soft key (			).
		SELECT
4	Scroll to “Set line mode” by pressing [d]
								Set line mode
	or [B], then press the soft key (					).
			SELECT
5	Select “A” or “B” by pressing [d] or [B].
								Set line mode
								:B

6Press the soft key ( SAVE ), then press [OFF].

Preparation

17