Panasonic KX-TG5230C Speed Dialer, Storing Phone Numbers Base Unit, To erase a stored number

Speed Dialer

Storing Phone Numbers Base Unit

You can store up to 10 phone numbers in the base unit. The dialing buttons ([0] to [9]) function as memory stations.

Make sure the base unit is not being used.

1Press [PROGRAM].

•The IN USE indicator flashes.

2Enter a phone number of up to 32 digits.

•If you misdial, press [PROGRAM], and start again from step 1.

3Press [AUTO].

4Press a memory station number ([0] to [9]).

•A long beep sounds and the phone number is saved.

•To store other numbers, repeat from step 1.

Memory	[REDIAL/PAUSE]
Station	[PROGRAM]
Numbers	[AUTO]

[SP-PHONE]

•If a pause is required when dialing, press [REDIAL/PAUSE] where needed. A pause counts as one digit (p. 56).

•If a phone number is stored in a memory location which already contains a phone number, the old number will be erased.

•We recommend you make a note of which phone numbers are stored in which memory locations.

To erase a stored number

1.Press [PROGRAM], then press [AUTO].

2.Press the memory station number ([0] to [9]) for the phone number to be erased.

• A long beep sounds and the phone number is erased.

Dialing a Stored Phone Number Base Unit

1Press [SP-PHONE].

2Press [AUTO].

3Press a memory station number ([0] to [9]).

• The stored number is dialed.

•Speed dial numbers stored in the base unit can only be dialed from the base unit.

42