Panasonic KX-TG5230C operating instructions Making Intercom Calls, Press HOLD/INTERCOM

Intercom

Intercom calls can be made between a handset and the base unit, and between two handsets (when the system has two or more handsets, p. 3). You can page all handsets at once from the base unit, and announce the page to all handsets (Voice Paging, p. 45).

Page the desired unit(s) by entering the extension number, shown in the top right of each handset’s display. The base unit’s extension number is 0.

Making Intercom Calls

From Handset

1	Press [HOLD/INTERCOM].
		Press extension#
		to call
		1-4=Handset
		0=Base
2	To page the base unit, press [0].	e.g. Calling Base unit
	To page another handset, press its extension	Calling Base
	number ([1] to [4]).
	• The paged unit will ring for 1 minute.	e.g. Calling Handset 2
	• To stop paging, press [OFF].	Calling HS[2]
3	When the paged party answers, begin	e.g. Intercom between
	speaking.	Handset 1 & Base unit
	• You can switch to the speaker by pressing [s].	Intercom
	To switch back to the receiver, press [C].	00-00-05
		D01
4	To disconnect the intercom, press [OFF].

From Base Unit

Using this feature, you can also locate a misplaced handset.

1Press [LOCATOR/INTERCOM/TRANSFER].

•The LOCATOR/INTERCOM/TRANSFER and SP-PHONE indicators light.

2To page all handsets, press [0].

To page a specific handset, press its extension number [1] () to [4] ().

•The handset(s) will ring for 1 minute.

•To stop paging, press [SP-PHONE] or [LOCATOR/INTERCOM/TRANSFER].

3When the paged party answers, speak into the MIC.

4To disconnect the intercom, press [SP-PHONE]or [LOCATOR/

INTERCOM/TRANSFER].

•The indicator lights go out.

Advanced Operation

43