Panasonic KX-TG5230C Answering Intercom Calls, Press C, s or HOLD/INTERCOM

Intercom

During an intercom call:

•If you have difficulty hearing while using the speakerphone on the handset or base unit, decrease the speaker volume by pressing [d].

•If an incoming call is being received, you will hear two tones (incoming call tone, p. 61) and the IN USE indicator on the base unit will flash rapidly.

To answer the call:

—if using the handset, press [OFF], then press [C] or [s].

—if using the base unit, press [SP-PHONE] twice.

Answering Intercom Calls

Handset

When a handset is paged, it rings and the Ringer/Message Alert indicator flashes rapidly. The display shows the calling extension.

1Press [C], [s] or [HOLD/INTERCOM].

•You can also answer a page by pressing any button except [d], [B] or [OFF].

e.g. Base calling

Call from Base

e.g. Handset 2 calling

Call from HS[2]

2 To disconnect the intercom, press [OFF].

•If the Auto Talk feature is turned on (p. 18), you can also answer a page by simply lifting the handset off the base unit (or the charger, for accessory handset users, p. 3).

Base Unit

When the base unit is being paged, it rings and the LOCATOR/INTERCOM/ TRANSFER indicator flashes.

1Press [SP-PHONE] or [LOCATOR/INTERCOM/TRANSFER].

2To disconnect the intercom, press [SP-PHONE]or

[LOCATOR/INTERCOM/TRANSFER].

•When the ringer volume is turned off (p. 18, 19), the handset and the base unit will ring at the low level for intercom calls.

•You cannot change the ringer tone for intercom calls.

•When the base unit user pages all handsets, only the handset user who answers first can talk with the base unit user.

44