Base unit speed dial
Base unit speed dial
You can assign one phone number to each of the 10 dial keys ({0} – {9}) on the base unit.
Adding phone numbers to speed dial
Important:
L Before adding phone numbers, make sure the base unit is not in use.
1{l}
L The in use indicator flashes.
2Enter the phone number (24 digits max.).
L If a pause is required for dialling, press {P} where needed (page 16).
L If you enter incorrectly, continue and finish step 4, then start again from step 1.
3{l}
4Press a dial key ({0} – {9}).
L A long beep is heard and the in use indicator stops flashing.
Note:
LIf a phone number is assigned to a dial key which already contains a phone number, the old number will be erased.
L We recommend you make a note of which phone numbers are stored in which dial keys.
To erase a stored phone number
1{l} 2 times
2Press the desired dial key ({0} – {9}).
Making a call using the speed dial keys
1{s} i {l}
2Press the desired dial key ({0} – {9}).
Note:
L Speed dial numbers can only be dialled from the base unit.
22