Preparation
Battery charge
Place the handset on the base unit or charger for about 7 hours before initial use.
LWhile charging, “Charging” is displayed and the charge indicator on the handset lights up. When the batteries are fully charged, “Charge Completed” displays. The charge indicator stays lit even after the batteries are fully charged.
Note:
L It is normal for the handset to feel warm during charging.
L If you want to use the unit immediately, charge the batteries for at least 15 minutes.
L Clean the charge contacts of the handset, base unit, and charger with a soft, dry cloth once a month. Clean more often if the unit is exposed to grease, dust, or high humidity.
Battery level
Battery icon | Battery level |
1High
2Medium
3Low
L When flashing: Needs charging.
Panasonic
Operation | Operating |
| time |
In continuous use | 17 hours max. |
Not in use | 150 hours |
(standby) | max. |
Note:
L It is normal for batteries not to reach full capacity at the initial charge. Maximum battery performance is reached after a few complete cycles of charge/discharge (use).
L Actual battery performance depends on a combination of how often the handset is in use and how often it is not in use (standby).
L Even after the handset is fully charged, the handset can be left on the base unit or charger without any ill effect on the batteries.
L The battery level may not be displayed correctly after you replace the batteries. In this case, place the handset on the base unit or charger and let it charge for at least 7 hours.
13