Handset Settings
6Select the desired setting, then press
{>}.
7Press {ih}.
Note:
L When the answering system answers the call, this feature does not work (KX- TG1233 only).
Selecting categories to bypass night mode
1Press {j/OK}.
2Select “Handset Setup”, then press
{>}.
3Select “Ringer Setup”, then press
{>}.
4Select “Night Mode”, then press {>}.
5Select “Select Category”, then press {>}.
6Press the desired category numbers, then press {j/OK}.
L The selected category number will flash.
L To cancel a selected category number, press the number again. The number will stop flashing.
7Press {ih}.
Note:
L If a call is received from one of the categories set to bypass night mode, the handset will ring.
Display setup
Selecting the standby mode display
“Base Number”: The current base unit number is displayed.
“Handset Number”: The current handset number is displayed.
“Off”: Only the current date and time are displayed.
1Press {j/OK}.
2Select “Handset Setup”, then press
{>}.
3Select “Display Setup”, then press
{>}.
4Select “Standby Display”, then press {>}.
5Select the desired setting, then press
{>}.
6Press {ih}.
Note:
L If “Base Number” is selected and the current base unit number is 2,
L If “Handset Number” is selected and the current handset number is 2, “[2]” is displayed.
Changing the display language
1Press {j/OK}.
2Select “Handset Setup”, then press
{>}.
3Select “Display Setup”, then press
{>}.
4Select “Select Language”, then press {>}.
5Select the desired language, then press
{>}.
6Press {ih}.
Note:
L If you select a language you cannot read, press {ih}, {j/OK}, press {e} 2 times, press {>}, press {v} 2 times, press {>}, press {v}, press {>}, select the desired language, then press {>}. Press {ih}.
28